Electric Dryer Power Hookup Canada only

Closet Installation (stacked washer and dryer):

(152 mm)

ELECTRIC DRYER

POWER HOOKUP – CANADA ONLY

ELECTRICAL REQUIREMENTS

(76 mm)

71"

(1803 mm)

51/2"

(140 mm)

(76 mm)

1"	1"
1"	(25 mm)
(25 mm)

48in.2

(310 cm2)

24in.2

(155 cm2)

It is your responsibility:

■■ To contact a qualified electrical installer.

Custom under counter installation (dryer only):

■■ To be sure that the electrical connection is adequate and in conformance with Canadian Electrical Code, C22.1 – latest edition and all local codes. A copy of above codes standard may be obtained from: Canadian Standards Association, 178 Rexdale Blvd., Toronto, ON M9W 1R3 CANADA.

1" (25 mm)

39" min.

(990 mm)

(25 mm)

■■ To supply the required 4-wire, single phase, 120/240 volt, 60 Hz, AC only electrical supply on a separate 30-amp circuit, fused on both sides of the line. A time-delay fuse or circuit breaker is recommended. Connect to an individual branch circuit.

■■ This dryer is equipped with a CSA International Certified Power Cord intended to be plugged into a standard

14-30R wall receptacle. The cord is 5 ft.

(1.52 m) long. Be sure wall receptacle is

NOTE: Some models not recommended for undercounter installation.

Mobile home – Additional installation requirements:

This dryer is suitable for mobile home installations. The installation must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile home construction and Safety, Title 24, HUD Part 280) or Standard CAN/CSA-Z240 MH.

Mobile home installations require:

All dryers:

■■ Metal exhaust system hardware, available for purchase from your dealer. For further information, see “Assistance or Service” section in your Use and Care Guide.

■■ Special provisions must be made in mobile homes to introduce outside air into dryer. Openings (such as a nearby window) should be at least twice as large as dryer exhaust opening.

For gas dryers mobile home installations:

■■ Mobile Home Installation Hold-down Kit Part Number 346764 is available to order. For further information, see “Assistance or Service” section in your Use and Care Guide.

within reach of dryer’s final location. 4-wire receptacle (14-30R)

If using a replacement power supply cord, it is recommended that you use Power Supply Cord Replacement Part Number 9831317.

For further information, please reference service numbers located in “Assistance or Service” section of your Use and Care Guide.

GROUNDING INSTRUCTIONS

■For a grounded, cord-connected dryer:

This dryer must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.

This dryer is equipped with a cord having an equipment- grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a quali•ed electrician or service representative or personnel if you are in doubt as to whether the dryer is properly grounded. Do not modify the plug provided with the dryer: if it will not •t the outlet, have a proper outlet installed by a quali•ed electrician.

SAVE THESE INSTRUCTIONS

W10443046B-SP, W10443045B specifications

The Maytag W10443045B and W10443046B-SP are exceptional solutions designed for those seeking reliability and performance in their kitchen appliances. These products are part of Maytag's reputation for durability and efficiency, making them ideal for daily use in busy households.

One of the main features of these models is their robust construction. Built with high-quality materials, they promise longevity and resilience against daily wear and tear. Both models are designed to offer easy installation, ensuring that users can set them up without requiring professional assistance. This user-friendly approach extends to their maintenance, as they are designed for easy cleaning and upkeep.

In addition to durability, the W10443045B and W10443046B-SP include advanced technological features. They come equipped with the latest in smart appliance technology, allowing users to monitor and control their settings through a dedicated mobile app. This capability offers convenience, ensuring that users can manage their appliances from virtually anywhere in their home.

Energy efficiency is another hallmark of these models. Maytag has integrated energy-saving technology into these products, helping users reduce their utility bills while also being environmentally conscious. The energy-efficient design maintains high performance without sacrificing power, embracing sustainability without compromising on functionality.

The design of both models is aesthetically pleasing, featuring sleek lines and a modern finish that complements a variety of kitchen styles. Their user-friendly controls make them accessible to everyone, while the spacious interior provides ample room for cooking and storing food items.

Safety features are also prioritized in the W10443045B and W10443046B-SP. These models include automatic shut-off systems and temperature controls that ensure safe operation during use. This focus on safety provides peace of mind for users who want to ensure their kitchen is a safe environment for family members.

Overall, the Maytag W10443045B and W10443046B-SP combine functionality, longevity, and modern technology, making them standout choices for consumers looking to upgrade their kitchen appliances. With their impressive features and thoughtful design, these models are sure to meet the needs of any contemporary household.

Maytag W10443046B-SP, W10443045B Electric Dryer Power Hookup Canada only, Electrical Requirements

Models: W10443046B-SP W10443045B