GAS Supply Line, Burner Input Requirements

GAS SUPPLY LINE

■■ Must include 1/8" NPT minimum plugged tapping accessible for test gauge connection, immediately upstream of the gas connection to the dryer.

A. 3/8" flexible gas connector

B. 3/8" pipe to flare adapter fitting

C. 1/8" NPT minimum plugged tapping

D. 1/2" NPT gas supply line

E. Gas shutoff valve

■■ 1/2" IPS pipe is recommended.

■■ 3/8" approved aluminum or copper tubing is acceptable for lengths under 20 ft. (6.1 m) if local codes and gas supplier permit.

■■ If you are using natural gas, do not use copper tubing.

■■ Lengths over 20 ft. (6.1 m) should use larger tubing and a different size adapter fitting.

■■ If your dryer has been converted to use LP gas, 3/8" LP compatible copper tubing can be used. If the total length of the supply line is more than 20 ft. (6.1 m), use larger pipe.

NOTE: Pipe-joint compounds that resist the action of LP gas must be used. Do not use TEFLON®† tape.

■■ Must include shut-off valve

In the U.S.A.:

An individual manual shut-off valve must be installed within six (6) ft. (1.8 m) of the dryer in accordance with the National Fuel Gas Code, ANSI Z223.1. The location should be easy to reach for opening and closing.

In Canada:

An individual manual shut-off valve must be installed in accordance with the B149.1, Natural Gas and Propane Installation Code. It is recommended that an individual manual shut-off valve be installed within six (6) ft. (1.8 m) of the dryer. The location should be easy to reach for opening and closing.

†®TEFLON is a registered trademark of E.I. Dupont De Nemours and Company.

GAS SUPPLY CONNECTION REQUIREMENTS

■■ Use an elbow and a 3/8" flare x 3/8" NPT adapter fitting between the flexible gas connector and the dryer gas pipe, as needed to avoid kinking.

■■ Use only pipe-joint compound. Do not use TEFLON®† tape.

■■ This dryer must be connected to the gas supply line with a listed flexible gas connector that complies with the standard for connectors for gas appliances, ANSI Z21.24 or CSA 6.10.

BURNER INPUT REQUIREMENTS

Elevations above 10,000 ft. (3,048 m):

■■ When installed above 10,000 ft. (3,048 m) a 4% reduction of the burner Btu rating shown on the model/serial number plate is required for each 1,000 ft. (305 m) increase in elevation.

Gas supply pressure testing

■■ The dryer must be disconnected from the gas supply piping system during pressure testing at pressures greater than 1/2 psi.

DRYER GAS PIPE

■■ The gas pipe that comes out through the rear of your dryer has a 3/8" male pipe thread.

*61/4"A

(159 mm)

1 1/2"

(38 mm)

A. 3/8" NPT dryer pipe

*NOTE: If the dryer is mounted on a pedestal, the gas pipe height must be an additional 10" (254 mm) or 15.5" (394 mm) from the floor, depending on the pedestal model. For a garage installation, the gas pipe height must be an additional 18"

(460 mm) from the floor.

W10443046B-SP, W10443045B specifications

The Maytag W10443045B and W10443046B-SP are exceptional solutions designed for those seeking reliability and performance in their kitchen appliances. These products are part of Maytag's reputation for durability and efficiency, making them ideal for daily use in busy households.

One of the main features of these models is their robust construction. Built with high-quality materials, they promise longevity and resilience against daily wear and tear. Both models are designed to offer easy installation, ensuring that users can set them up without requiring professional assistance. This user-friendly approach extends to their maintenance, as they are designed for easy cleaning and upkeep.

In addition to durability, the W10443045B and W10443046B-SP include advanced technological features. They come equipped with the latest in smart appliance technology, allowing users to monitor and control their settings through a dedicated mobile app. This capability offers convenience, ensuring that users can manage their appliances from virtually anywhere in their home.

Energy efficiency is another hallmark of these models. Maytag has integrated energy-saving technology into these products, helping users reduce their utility bills while also being environmentally conscious. The energy-efficient design maintains high performance without sacrificing power, embracing sustainability without compromising on functionality.

The design of both models is aesthetically pleasing, featuring sleek lines and a modern finish that complements a variety of kitchen styles. Their user-friendly controls make them accessible to everyone, while the spacious interior provides ample room for cooking and storing food items.

Safety features are also prioritized in the W10443045B and W10443046B-SP. These models include automatic shut-off systems and temperature controls that ensure safe operation during use. This focus on safety provides peace of mind for users who want to ensure their kitchen is a safe environment for family members.

Overall, the Maytag W10443045B and W10443046B-SP combine functionality, longevity, and modern technology, making them standout choices for consumers looking to upgrade their kitchen appliances. With their impressive features and thoughtful design, these models are sure to meet the needs of any contemporary household.

Maytag W10443046B-SP GAS Supply Line, GAS Supply Connection Requirements, Dryer GAS Pipe

Models: W10443046B-SP W10443045B