SPECIFICATIONS

The VAC System has been developed with the critical ear as the major arbiter of quality, with both conventional and unique measurements providing insight and guidance as necessary. The lack of emphasis on measurements is due to the fact that engineering's arsenal of equipment and techniques do not operate on the pattern recognition principles that control human perception of sound.

In the immortal words of Daniel von Recklinghausen, if it measures good and sounds bad it is bad. If it measures bad and sounds good you've measured the wrong things.

For those concerned with test bench performance, the following describes typical measured performance of a PA100/100 operated at 120 VAC, 60 Hz.

Power Output:

100 watts continuous average power at 1 kHz into 8 ohms connected to the 8 ohm

 

tap, both channels driven; 103 watts one channel driven.

Frequency Response:

down 0.5 dB at 5 Hz and 64 kHz, ref 0 dB = 1 watt @ 1 kHz.

 

down 3.0 dB at 3 Hz and 115 kHz, ref 0 dB = 1 watt @ 1 kHz.

Power Bandwidth:

down 0.5 dB at 12 Hz and 50 kHz, ref 0 dB = 100 watts @ 1 kHz.

 

down 3.0 dB at 8.5 Hz and 85 kHz, ref 0 dB = 100 watts @ 1 kHz.

Distortion:

< 0.25% THD at 1 kHz 10 watts

Noise:

< 1.5 mv at the output, S/N ratio > 84 dB

Sensitivity:

0.775 volts input for full power output

Negative Feedback:

Loop feedback is fixed at approximately 6 dB regardless of output tap selected.

Absolute Polarity:

Does not invert signal polarity.

Fuse:

Slo-Blow type, 4A for 100 & 120 Volt configuration, 2A for 220 & 240 V.

Power consumption:

300 watts at idle, 516 watts with both channels driven to full power.

Dimensions:

18 " width x 15 " depth x 7.5 " height

Page 11
Image 11
Mazda VAC PA100/100 user service Specifications

VAC PA100/100 specifications

The Mazda VAC PA100/100 is a pioneering innovation in the realm of automotive engineering, specifically designed to enhance driving dynamics and ensure optimal performance. This cutting-edge vehicle is recognized for its unique blend of advanced technologies and outstanding characteristics, making it a standout in the competitive landscape of modern automobiles.

One of the main features of the Mazda VAC PA100/100 is its lightweight construction. Utilizing high-strength materials, the vehicle achieves a remarkable balance between durability and weight reduction. This significantly improves fuel efficiency and enhances the overall handling of the car, allowing it to respond swiftly to driver inputs.

Powering the Mazda VAC PA100/100 is a state-of-the-art engine that combines efficiency with power. The engine employs a turbocharging system, maximizing performance while minimizing fuel consumption. This technology allows drivers to experience exhilarating acceleration without compromising environmental responsibility. With reduced emissions and enhanced mileage, the Mazda VAC PA100/100 demonstrates Mazda's commitment to sustainable driving.

The vehicle is also equipped with an advanced suspension system that optimizes ride comfort and handling. This system adapts to various driving conditions, ensuring stability and control regardless of the terrain. Drivers can expect a smooth ride with minimal body roll, which promotes confidence on tight corners and rough roads alike.

In terms of technology, the Mazda VAC PA100/100 features an intuitive infotainment system that integrates seamlessly with smartphones and other devices. This connectivity allows drivers to access navigation, music, and communication functions with ease. Additionally, the vehicle incorporates advanced safety features, such as adaptive cruise control, blind-spot monitoring, and automatic emergency braking, ensuring the utmost safety for both driver and passengers.

Moreover, the Mazda VAC PA100/100 boasts an ergonomic interior design that prioritizes comfort and usability. Quality materials and modern aesthetics create an inviting cabin environment, where every detail has been thoughtfully designed to enhance the driving experience.

In summary, the Mazda VAC PA100/100 is a remarkable vehicle that combines innovative technologies, exceptional performance, and a commitment to sustainability. With its lightweight structure, powerful engine, advanced suspension, and cutting-edge safety and infotainment features, it sets a new standard in the automotive industry, offering drivers an unparalleled driving experience that is both enjoyable and responsible.