FX1.400 / FX1.600
Mono Amplifiers
FEATURES:
-1 Set of RCA inputs
-LEVEL: Variable sensitivity from 0.2V to 6V
-BASS EQ: Adjustable 45Hz bass boost from 0dB to 12dB
-SUBSONIC: Variable from 10Hz to 40Hz
-LOW PASS: Variable from 40Hz to 300Hz
OUTPUT INPUT
| REMOTE |
|
|
|
|
|
|
| L |
POWER | BASS BOOST | SUBSONIC | LOW PASS |
| LEVEL | ||||
PROTECT | 0dB | 12dB | 10Hz | 40Hz | 40Hz | 300Hz | 6V | 0.2V | R |
-POWER LED: Indicates the powered up and turned on condition
-PROTECT LED: Indicates a high voltage, low voltage, short circuit, hard clip, over heating or DC fault condition.
-LINE OUTPUT: Full range RCA pass through.
Interconnect cable checklist:
Connect the inputs to a suitable source, e.g. a head unit with good quality RCA cables.
Use at least #14 gauge speaker wiring. The amps have dual speaker terminals, simplifying the hookup of multiple speakers. These amps are mono, 1 channel, amplifiers
which have multiple positive0and negative connections for ease of wiring. The 2 positives .2V
are the same internally and the 2 negatives are the same internally.
Control checklist:
Refer to the section “Settings for Best Performance”
Minimum final loudspeaker impedance:
Warning: The mono amps are 4 &
MIN MAXX
DESIGNATED
MONO OUTPUT FROM HEAD UNIT
PROTECT | POWER |
| REMOTE |
0dB | BASS |
12dB | BOOST |
10Hz 40Hz | SUBSONIC |
40Hz | LOW |
300Hz | PASS |
6V | LEVEL |
| |
R | L |
| OUTPUT |
| INPUT |
OUTPUT | + | MONO |
+ | ||
SPEAKER | - | SUBWOOFER |
|
| |
| - |
|
FUSE |
|
|
INPUTPOWER | BATT+12VREMGND | TO BATTERY + 12 Volts |
VIA FUSE | ||
|
| REMOTE |
|
| CHASSIS GROUND |
FUSE |
7