107P The OSD Controls
6) To adjust the horizontal convergence, press the 
or
button.
7) When the horizontal convergence is adjusted, press the | button to highlight VERTICAL |
CONVERGENCE. |
|
8) To adjust the vertical convergence, press the 
or
button.
9) When the vertical convergence is adjusted, press the | button to return to the EXTRA CONTROLS |
window. BACK TO MAIN CONTROLS is highlighted. |
|
Smart
Help
After returning to EXTRA CONTROLS . . .
. . . to continue to ADJUST PURITY, press the button until ADJUST PURITY is highlighted. Next, start with step 4 under EXTRA CONTROLS - ADJUST PURITY.
Note: If you have not degaussed the monitor, please follow the steps under the Extra Controls - Degauss section of this manual before adjusting the purity.
. . . to exit completely, press the 
button twice.
file:///G/manual/english/107P/osd/osd_cont.htm (26 of 32) [10/16/1999 6:30:41 AM]
