OPERATION

The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spec- tacles or standard safety glasses.

HOW TO USE YOUR TRACTOR

TO SET PARKING BRAKE (See Fig. 5)

Your tractor is equipped with an operator presence sens- ing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

•Depress clutch/brake pedal (B) all the way down and hold.

•Pull parking brake lever (C) up and hold, release pres- sure from clutch/brake pedal (B), then release parking brake lever. Pedal should remain in brake position. Make sure parking brake will hold tractor secure.

C

B

Fig. 5

STOPPING (See Fig. 6)

MOWER BLADES -

•To stop mower blades, place attachment clutch control in the “DISENGAGED” position ().

FIG. 6

GROUND DRIVE -

•To stop ground drive, depress clutch/brake pedal into full “BRAKE” position.

•Move gearshift lever (J) to neutral position.

ENGINE -

•Move throttle control (D) between half and full speed (fast) position.

NOTE: Failure to move throttle control between half and full speed (fast) position, before stopping may cause engine to “backfire”.

•Turn ignition key (F) to “STOP” position and remove key. Always remove key when leaving tractor to prevent unauthorized use.

•Never use the choke to stop the engine.

IMPORTANT: LEAVING THE IGNITION SWITCH IN ANY POSITION OTHER THAN "STOP" WILL CAUSE THE BATTERY TO BE DISCHARGED, (DEAD).

NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause “browning” of grass. To eliminate this possibility, al- ways stop engine when stopping tractor on grass areas.

CAUTION: Always stop tractor com- pletely, as described above, and set parking brake before leaving the opera- tor's position.

TO USE THROTTLE CONTROL (D) (See Fig. 7)

Always operate engine at full speed (fast).

•Operating engine at less than full speed (fast) reduces the engine's operating efficiency.

•Full speed (fast) offers the best mower performance.

D

F

Fig. 7

11

Page 10 Page 12
Page 11
Image 11
McCulloch 422800 manual HOW to USE Your Tractor, To SET Parking Brake See Fig, Stopping See Fig
Page 10 Page 12

422800 specifications

The McCulloch 422800 is a powerful and versatile chainsaw designed for both professional and recreational woodworkers. Aimed at providing an efficient solution for cutting tasks, this model has garnered attention for its robust features, advanced technologies, and user-friendly design.

One of the standout characteristics of the McCulloch 422800 is its efficiency. It is equipped with a 42cc engine, which delivers a strong performance while ensuring that fuel consumption remains at a reasonable level. This balance of power and efficiency allows users to tackle a variety of cutting tasks, from felling small trees to limb removal and firewood preparation.

A notable feature of the McCulloch 422800 is its lightweight design, making it easy for users to maneuver during operation. Weighing only around 10.5 lbs, this chainsaw reduces user fatigue, enabling longer periods of work without discomfort. The ergonomic handle design further enhances comfort and control, allowing operators to maintain a firm grip even in challenging conditions.

The chainsaw features an automatic oiling system, which ensures that the cutting bar and chain receive the necessary lubrication during operation, enhancing overall performance and extending the lifespan of the components. This system also minimizes the risk of overheating, a common concern for chain saw enthusiasts and professionals alike.

Safety is a priority in the design of the McCulloch 422800, featuring a chain brake that stops the chain in case of kickback, protecting the user from potential injuries. Additionally, the chainsaw is equipped with a throttle lock, which prevents unintentional acceleration, further enhancing safety during use.

Maintenance is straightforward with the McCulloch 422800, as it includes easy access to the air filter and spark plug, simplifying routine checks and servicing. This user-centric design minimizes downtime and ensures that users can keep their chainsaw in optimal working condition.

A powerful, lightweight, and feature-rich tool, the McCulloch 422800 is perfect for both seasoned professionals and casual users interested in reliable performance. Its combination of efficiency, safety features, and ease of maintenance make it an excellent choice for anyone looking to tackle wood cutting tasks with confidence.
Top Page Image Contents