SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

•Depress clutch/brake pedal fully and set parking brake.

•Place gearshift lever in neutral position.

•Place attachment clutch in “DISENGAGED” position.

•Turn ignition key to “STOP” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TO REMOVE MOWER (See Fig. 16)

•Place attachment clutch in “DISENGAGED” position.

•Lower attachment lift lever to its lowest position.

•Remove mower belt from engine pulley (M).

•Remove retainer spring (K), slide collar (L) off and push housing guide (P) out of bracket.

•Remove clutch cable spring (Q) from idler arm (R).

•Disconnect front link (E) from mower - remove retainer spring and washer.

•Go to either side of mower and disconnect mower suspension arm (A) from chassis and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers.

•Go to other side of mower and disconnect the suspen- sion arm and rear lift link.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONT LINK (E) AND REAR LIFT LIKS

(C)FROM TRACTOR AND HOOK THE CLUTCH SPRING

(Q)INTO THE CABLE GUIDE ON FRONT EDGE OF LOWER DASH.

TO INSTALL MOWER (See Figs. 16-21)

Be sure tractor is on level surface and engage parking brake.

•Lower attachment lift lever to it's lowest position.

CAUTION: Lift lever is spring loaded. Have a tight grip on lift lever, lower it slowly and engage in lowest position.

CAUTION: After rear lift links are dis- connected, the attachment lift lever will be spring loaded. Have a tight grip on lift lever when changing position of the lever.

• Slide mower out from under right side of tractor.

B

 

Q R

NOTE: Be sure mower side suspension arms (A) are point- ing forward before sliding mower under tractor.

•Slide mower under tractor until it is centered under tractor.

MF

AE

P

K

C

D

L

FIG. 16

 

19

Page 18 Page 20
Page 19
Image 19
McCulloch 422800 manual Service and Adjustments, To Remove Mower See Fig, To Install Mower See Figs
Page 18 Page 20

422800 specifications

The McCulloch 422800 is a powerful and versatile chainsaw designed for both professional and recreational woodworkers. Aimed at providing an efficient solution for cutting tasks, this model has garnered attention for its robust features, advanced technologies, and user-friendly design.

One of the standout characteristics of the McCulloch 422800 is its efficiency. It is equipped with a 42cc engine, which delivers a strong performance while ensuring that fuel consumption remains at a reasonable level. This balance of power and efficiency allows users to tackle a variety of cutting tasks, from felling small trees to limb removal and firewood preparation.

A notable feature of the McCulloch 422800 is its lightweight design, making it easy for users to maneuver during operation. Weighing only around 10.5 lbs, this chainsaw reduces user fatigue, enabling longer periods of work without discomfort. The ergonomic handle design further enhances comfort and control, allowing operators to maintain a firm grip even in challenging conditions.

The chainsaw features an automatic oiling system, which ensures that the cutting bar and chain receive the necessary lubrication during operation, enhancing overall performance and extending the lifespan of the components. This system also minimizes the risk of overheating, a common concern for chain saw enthusiasts and professionals alike.

Safety is a priority in the design of the McCulloch 422800, featuring a chain brake that stops the chain in case of kickback, protecting the user from potential injuries. Additionally, the chainsaw is equipped with a throttle lock, which prevents unintentional acceleration, further enhancing safety during use.

Maintenance is straightforward with the McCulloch 422800, as it includes easy access to the air filter and spark plug, simplifying routine checks and servicing. This user-centric design minimizes downtime and ensures that users can keep their chainsaw in optimal working condition.

A powerful, lightweight, and feature-rich tool, the McCulloch 422800 is perfect for both seasoned professionals and casual users interested in reliable performance. Its combination of efficiency, safety features, and ease of maintenance make it an excellent choice for anyone looking to tackle wood cutting tasks with confidence.
Top Page Image Contents