McCulloch 96041016500 Bagger Parts, Piezas De La Ensacadora, Teile Des Gras-Auffangbehälters

2

BAGGER PARTS	PIEZAS DE LA ENSACADORA
TEILE DES GRAS-AUFFANGBEHÄLTERS	PARTI DEL SACCO DI TELA
PIÈCES DE RECHANGE DU RAMASSE-HERBE	ONDERDELEN OPVANGBAK

1/4 x 20 x 1.25”	1/4 x 20 x 1.15	1/4 x 20	Retainer Spring Clip	Clevis Pin
Carriage Bolts	Shoulder Bolts	Flange Lock Nuts	Federklammer-Sicherung	Gabelstift
Karosserieschrauben	Ansatzschrauben	Flanschkontermuttern	Attache à ressort	Axe de chape
Boulons de carrosserie	Boulons à épaulement	Écrous frein	Abrazadera de	Pasador de horquilla
Tornillos de cabeza redonda	Pernos de tope	Tuerca de presión con brida	arandela de retención	Perno
Bulloni a testa tonda	Bulloni di spallamento	Dadi flangiati	Clip di fissaggio	Vorkbout
Slotbouten	Borstbouten	Flensborgmoeren	Sluitveerklem

TO ASSEMBLY BAGGER

•Unfold bag and stand right side up.

•Feed front bagger frame (1) up through fabric loops at each side of bagger.

•Snap bottom of front bagger frame (1) into snap feature at front of bagger bottom.

•Slide bagger fabric loop (2) segments at the ends of bag onto top bagger frame tubing.

•Uninstall two (1\4”-20 x 1.15”) hex bolts (3) from the front of top frame.

•Reinstall the two (1\4”-20 x 1.15”) hex bolts (3) through holes at top of the front bagger frame and thread into nuts inside the tubing of top bagger frame.

2

3

1

•Uninstall (1/4”-20) lock nuts (4) at bottom of front bagger frame.

•Unfold cross braces (5) and attach to carriage bolts (6) at bottom corners of front bagger frame.

•Reinstall (1/4”-20) lock nuts (4) and tighten until fully seated.

5

4

•Remove clevis pin (7) and retainer spring (8) from bagger handle (9).

•Slide bagger handle (9) down through bagger cover and frame upper weldment holes.

•Reinstall clevis pin (10) through hole at bottom of bagger handle and slide retainer spring (11) into hole at the end of the clevis pin until it locks into place

8	9
	7

TO ADJUST BAGGER FULL LEVER/PADDLE

•Before adjusting, tractor engine must be shut off and parking brake engaged.

1	2
	4
	3
3	5

•For the heaviest/wet grasses, remove paddle (3).

•For lighter grasses use the paddle (3) on setting “1”, “2”, or “3” (“3” being for the lightest or dry grass).

•Choose your setting and rotate the bagger paddle (3) so that the desired number (setting) faces you.

•Setting may be changed by loosening fasteners (4 and 5), removing/rotating paddle (3), and tightening again.

23