3.Using bar tool, roll chain around guide bar to ensure all links are in bar groove.

4.Lift up tip of guide bar to check for sag. Release tip of guide bar, then turn ad- justing screw 1/4 turn clockwise. Repeat until sag does not exist.

Adjusting Screw -- 1/4 Turn

5.While lifting tip of guide bar, tighten bar nuts securely with the bar tool.

Bar Nuts

6.Use the screwdriver end of the bar tool to move chain around guide bar.

7.If chain does not rotate, it is too tight. Slightly loosen bar nuts and loosen chain by turning the adjusting screw 1/4 turn counterclockwise. Retighten bar nuts.

8.If chain is too loose, it will sag below the guide bar. DO NOT operate the saw if the chain is loose.

NOTE: The chain is tensioned correctly when the weight of the chain does not cause it to sag below the guide bar (with the chain saw sitting in an upright position), but the chain still moves freely around the guide bar.

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury to the op- erator and/or damage the chain making it un- usable. If the chain jumps off the guide bar, in- spect each drive link for damage. Damaged chain must be repaired or replaced.

OPERATION

KNOW YOUR CHAIN SAW

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

Chain

 

Front Hand Guard

Front Handle

 

Adjustment Tool

 

 

 

 

Starter Rope

 

(Bar Tool)

 

 

 

 

 

 

 

 

 

 

 

 

 

ON/STOP

Choke/

 

 

 

 

Switch

 

Chain

Muffler

 

Fast Idle

 

 

Lever

Bar

Bar Oil Fill Cap

 

 

 

 

Sprocket

 

 

 

 

 

Hole

Starter Housing

Fuel Mix Fill Cap

Primer Bulb

 

 

Cylinder Cover

 

 

 

 

Throttle

 

Chain

 

Chain

Lockout

 

Brake

 

Direction

Rear

 

 

 

 

of Travel

 

Adjusting Screw

 

 

Handle

 

 

 

 

 

 

 

 

 

 

Chain

Guide Bar

Throttle

 

 

 

Clutch Cover

Catcher

 

 

Trigger

Bar Nuts

 

 

 

 

ON/STOP SWITCH

THROTTLE TRIGGER

 

The ON/STOP SWITCH is used to stop the

The THROTTLE TRIGGER controls engine

engine.

 

speed.

 

 

 

8

Page 8
Image 8
McCulloch 576600401, 966625201, MC3516 instruction manual Operation, Know Your Chain SAW, ON/STOP Switch Throttle Trigger

576600401, MC3516, 966625201 specifications

The McCulloch 966625201 and 576600401 models, along with the MC3516, represent a dynamic trio of outdoor power equipment designed to enhance gardening and landscaping tasks. These products are renowned for their reliability, efficiency, and user-friendly features, making them popular choices among both homeowners and professionals.

The McCulloch 966625201 chainsaw is particularly noted for its high performance and durability. It features a powerful engine that delivers excellent cutting performance, enabling users to tackle a variety of wood-cutting tasks with ease. The chainsaw's ergonomic design ensures comfort during extended use, reducing fatigue for the operator. Additionally, the tool is equipped with an easy-start system and a low-vibration mechanism, enhancing both usability and safety.

Another impressive model, the McCulloch 576600401, is a robust trimmer designed for versatility in lawn care. This model boasts a powerful motor and a dual-line feed system, providing efficient cutting and trimming capabilities for various vegetation types. The trimmer’s adjustable handle allows for a customizable grip, which is essential for reaching difficult angles or tight spots around gardens. Its lightweight design simplifies maneuverability, making it a favorite for both amateur gardeners and savvy landscapers.

The McCulloch MC3516 is a multi-functional tool that combines a chainsaw, hedge trimmer, and pruner, making it an invaluable addition to any homeowner’s toolkit. The MC3516 stands out with its innovative combination of features, allowing users to switch between tasks effortlessly. The detachable components are easy to change, enhancing versatility while minimizing the need for multiple tools. Its compact design and lightweight construction make it easy to transport and store, catering to those with limited space.

All three models exhibit advanced technologies aimed at improving performance and user experience. They are designed with eco-friendly principles, ensuring reduced emissions and noise levels during operation. Moreover, features like automatic oiling systems and quick chain tensioning ensure optimal maintenance with minimal user effort. These characteristics underline McCulloch’s commitment to delivering tools that not only excel in power and efficiency but also prioritize environmental sustainability.

In conclusion, the McCulloch 966625201, 576600401, and MC3516 provide an array of features and technologies that set them apart in the market. Their ease of use, ergonomic designs, and innovative functionalities make them excellent choices for anyone looking to enhance their outdoor maintenance capabilities. Whether for professional landscaping or home gardening, these tools embody McCulloch’s promise of performance and reliability.