McCulloch ASB3206-CA user manual Assembly Instructions, International Symbols, Attach Flex Tube

2 - SAFETY PRECAUTIONS

2-3. INTERNATIONAL SYMBOLS

Use of these personal safety items is highly recommended to reduce the risk of accidental injury.

3 - ASSEMBLY INSTRUCTIONS

3-1. ATTACH FLEX TUBE

Put the hose clamp(C) on the flex tube before connecting
the flex tube and the fan’s outlet tube together.
Connect the flex tube (B) to the fan’s outlet tube (A) (Fig.
		D
3-1A) with a hose clamp (C) (Fig. 4-1B) and tighten	B
securely (Fig. 3-1B).			F
		180˚
					E
		3-2A
B
A				G

Read the User Manual.

Minimum operating distance

Pump the primer bulb 10 times.

3-1A

3-2B

THROTTLE LINKAGE CLIPS

C

3-1B

3-2. ATTACH OPERATING TUBE

NOTE: keep the throttle cable as straight as possible when connecting the blower tubes.

1.Place the unit on flat surface during assembly. Insure screw mechanism of clamp is positioned away from operator.

2.Put the hose clamp (C) on the flex tube and the oper- ating tube before connecting them together.

3.Turn the throttle linkage mark (D) so it aligns with the throttle handle (F) (Fig.3-2A). Insert the operating tube (E) into the flex tube (B) (Fig. 3-2A) and then tighten securely with a hose clamp (G) (Fig. 3-2B).

4.Attached throttle linkage clips (# 24-know your blower) - to both ends of the flex tube to secure the throttle cable. ( Fig. 3-2D)

3-2C

THROTTLE LINKAGE CLIPS

3-2D

6

7