McCulloch MC1275 warranty Attaching Carry Handle, Attaching Main Accessories

FIGURE 1

ASSEMBLING THE

HEAVY-DUTY STEAM CLEANER

ATTACHING CARRY HANDLE

1. Insert Carry Handle into Carry Handle hole on top of unit. Please refer to illustration for assistance with proper alignment (FIGURE 1).

2. Use enclosed magnetic screw driver and screw to securely fasten Carry Handle to unit.

ATTACHING MAIN ACCESSORIES

WARNING: Do not try to connect accessories while unit is emitting steam. This section applies to the Steam Jet Nozzle, Squeegee, Floor Brush, Extension Wands and Triangle Brush.

1.Depress red lock/release button on main steam nozzle (FIGURE 2-A).

2.While still depressing lock/release button, slide Steam Jet Nozzle or other accessory over this button, so that rectangular hole in attachment aligns with lock/release button (FIGURE 2-B).

3.Once lock/release button and rectangular hole are properly aligned, button should click through hole and into place.

4.To remove Steam Jet Nozzle or other accessory, press in red lock/release button and pull attachment off of main steam nozzle.

FIGURE 2

Top Innovations, Inc. 7