McCulloch MCS2001 user manual Introduction, General Information, Specifications, Please Read

INTRODUCTION

PLEASE READ

Dear Customer,

Thank you for purchasing a McCulloch product. With proper operation and maintenance, it will provide you with years of serv- ice.

In order to make the best use of your investment, be CERTAIN to familiarize yourself with the contents of the ENTIRE user manual before attempting to operate and maintain your unit.

Be sure to carefully follow the step-by-step instructions in this manual to start, operate and maintain your new product.

In the manual there will be the following call-outs: NOTE:, WARNING / CAUTION and WARRANTY.

A NOTE: is used to convey additional information, to highlight a particular explanation, or to expand a step description.

A WARNING or CAUTION identifies a procedure which, if not undertaken or if improperly done, can result in serious person- al injury and/or damage to the unit.

The (WARRANTY SYMBOL) serves notice that unless instructions or procedures are followed, any damage caused will void the warranty and repairs will be at owner’s expense.

Pay particular attention to the safety precautions. They are written for your protection and contain important information you must know to safely operate your chain saw.

FOR WARRANTY OR SERVICE CONTACT THE NEAREST AUTHORIZED SERVICE CENTER - LOCATE YOUR NEAREST

SERVICE CENTER BY CALLING THE TOLL FREE NUMBER IN THIS MANUAL.

2

1 - GENERAL INFORMATION

Top Hopper

ON-OFF

Top HopperSwitch

Safety Screws

	Overload
	Protection Switch
Side Chute

Discharge chute

access knobs

Wheel (L) Discharge Chute

Wheel (R)

Wheel

Cover

Axle Leg (R)

Leg (L)

SPECIFICATIONS

Input	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120V~, 60Hz, 14 Amp
No Load Speed .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3300 RPM
Hopper Size . . . .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13.4”x8.5”x7.9” (340x215x200mm)
Max. Cutting dia.	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1/2” (38mm)
Wheel Size	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7” (180m)
Net Weight	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78.3 Lbs. (35.6 Kg)

3