|
|
| Packing Instructions |
|
|
|
|
Packing Instructions |
|
|
|
|
|
|
|
|
|
|
|
In the event it is necessary to repack the equipment for | Quantity | Part Number | Description |
shipment, the equipment must be packed exactly as shown | 1 | 033888 | Shipping carton only |
below. It is very important that the four plastic feet are at- | 2 | 033887 | End cap (Foam pad) |
tached to the bottom of the equipment. Three #10 x |
|
|
|
inch screws and washers must be used to fasten the unit | 1 | 033697 | Inside carton only |
securely to the bottom pad and wood skid. This will ensure | 1 | 033725 | Top Pad |
the proper equipment location on the bottom pad. Failure to | 1 | 034008 | Bottom pad |
do this will result in shipping damage. | 2 | 017218 | Plastic foot (spacer) |
Use the original shipping carton and interior parts only | 1 | 033699 | Wood skid |
if they are all in good serviceable condition. If a shipping | 2 | 101204 | #10 x |
carton or any of the interior part(s) are needed, please call | 2 | 104033 | #10 x |
or write Customer Service Department of McIntosh Labo- |
|
|
|
ratory. Please see the Part List for the correct part numbers. | 4 | 017218 | Plastic foot |
| 4 | 100159 | |
|
|
| screw |
| 4 | 104083 | #10 x 7/16 inch Flat washer |
| 1 | 048572 | Sipping Carton Complete |
23
