McIntosh manual MA6900 Rear Panel Connections and Switch

MA6900 Rear Panel Connections and Switch

Main Fuse holder,	Right OUTPUT		CD1 balanced INPUTS		TAPE OUTPUTS		Left OUTPUT
refer to information	Connections for		accept high level program		provide the Record		Connections for
on the back panel	2, 4 or 8 ohm		source signals		Out Signal		2, 4 or 8 ohm
of your MA6900 to	loudspeakers						loudspeakers
determine the cor-
rect fuse size and
rating
The EXT		POWER CONTROL 1 and 2		OUTPUTS 1		VIDEO inputs	GND terminal
(external)		Outputs send a turn-on signal		and 2 supply		for audio signals	accepts a
SENSOR(s)		to an external McIntosh		the Preamplifier		from a LV, VCR,	ground wire
for a Keypad		Power Amplifier when the		Output to either		TV or an A/V	from a turn-
or IR Sensor		MA6900 Front Panel Output		the internal or		Selector	table
		1 and/or 2 is On		external power
				amplifier

POWER CONTROL MAIN Output sends a turn-on signal to an external McIntosh Power Amplifier when the MA6900 is turned on

DATA PORTS send signals to McIntosh Compatible Compo- nents to allow control with the remote con- trol

JUMPER PLUGS	TUNER and
connect the Pream-	CD2 inputs ac-
plifier OUTPUT 1	cept signals
Jacks to the POWER	from the output
AMP IN Jacks and	of a tuner and
are needed for nor-	CD player
mal operation

Connect the MA6900 power cord to a live AC outlet. Refer to in- formation on the back panel to deter- mine the correct voltage

POWER CONTROL ACC Output sends a turn-on signal to a McIntosh Source Component or Power Control unit when the MA6900 is turned on

POWER AMP IN	TAPE input	AUX accepts high level program
inputs accept sig-	accepts signals	source signals, PH accepts signals
nals from a sepa-	from the out-	from a Moving Magnet phono car-
rate external	put of a tape	tridge, and the small slide switch
preamplifier	deck	selects which one of these two in-
		puts is active when the front panel
		PH/AUX Push-button is pressed

7