|
|
| Packing Instructions |
|
|
|
|
Packing Instructions |
|
|
|
|
|
|
|
|
|
|
|
In the event it is necessary to repack the equipment for | Quantity | Part Number | Description |
shipment, the equipment must be packed exactly as de- | 1 | 034052 | Shipping carton top |
scribed and shown below. | 1 | 034051 | Shipping carton bottom |
The MC2102 Vacuum Tubes must be removed from the | 2 | 034054 | Foam Pad (top and bottom) |
Amplifier Tube Sockets and placed into the inside open- | 2 | 034186 | Foam Pad (front and rear) |
ings of the four layer foam packing material. The foam | 2 | 034187 | Foam Pad (sides) |
with the tubes located inside are placed into the Amplifier |
|
|
|
Tube Cover and secured to the Chassis. Failure to do this | 2 | 034180 | Foam pack tube (ends) |
will result in damage to the Vacuum Tubes and possibly the | 2 | 034179 | Foam pack tube (inside with |
MC2102. |
|
| tube cutouts) |
Four 1/4 - 20 x |
|
|
|
must be used to fasten the unit securely to the Shipping | 1 | 034136 | Inner carton top |
Skid. This will ensure the proper equipment location in the | 1 | 034137 | Inner carton bottom |
Inner Carton. Failure to do this will result in shipping dam- | 1 | 034008 | Bottom pad |
age. | 1 | 034161 | Shipping skid |
Use the original shipping carton and interior parts only | 4 | 101212 | 1/4 - |
if they are all in good serviceable condition. If a shipping | 4 | 104058 | Flat washer |
carton or any of the interior part(s) are needed, please call |
|
|
|
or write Customer Service Department of McIntosh Labo- ratory. Please see the Part List for the correct part numbers.
19
