Specifications
Specifications
Power Output Stereo
Minimum sine wave continuous average power output per channel, both channels operating is:
75 watts into 4, 8 or 16 ohm load
Power Output Mono (Parallel)
Minimum sine wave continuous average power output is: 150 watts into 2 ohm, 4 ohm or 8 ohm load
Output Load Impedance
4, 8, or 16 ohm (Stereo Mode) 2, 4, or 8 ohm (Mono Mode)
Rated Power Band
20Hz to 20,000Hz
Total Harmonic Distortion
Maximum Total Harmonic Distortion at any power level from 250 milliwatts to rated power output is 0.5%
Intermodulation Distortion
Maximum Intermodulation Distortion if instanta- neous peak output per channel does not exceed twice the rated output, for any combination of fre- quencies from 20Hz to 20,000Hz, with both chan- nels operating is 0.5%
Frequency Response
+0,
Sensitivity
1.2Volt unbalanced inputs
2.5Volt balanced inputs
Wide Band Damping Factor
Greater than 14
Tube Compliment
3 - 12AX7A Inputs and Phase Inverters
4 - 12AT7 Voltage Amplifier and Drivers
4 - KT88/6550 Power Output
Power Requirements
100 Volts, 50/60Hz at 3.6 amps
110 Volts, 50/60Hz at 3.6 amps
120 Volts, 50/60Hz at 3.6 amps
220 Volts, 50/60Hz at 1.8 amps
230 Volts, 50/60Hz at 1.8 amps
240 Volts, 50/60Hz at 1.8 amps
Note: Refer to the right side panel of the MC275 for the correct voltage.
Overall Dimensions
Width is
Height is
Weight
67 pounds (30.5kg) net, 75 pounds (34.lkg) in shipping car- ton
14