|
|
| Packing Instructions |
|
|
|
|
Packing Instructions |
|
|
|
| Quantity | Part Number | Description |
In the event it is necessary to repack the equipment for | |||
shipment, the equipment must be packed exactly as de- | 1 | 034005 | Shipping carton outside |
scribed and shown below. | 2 | 033718 | Foam Pad (side) |
The MC275 Vacuum Tubes must be removed from the Am- |
|
|
|
plifier Tube Sockets and placed into the inside open- | 2 | 034266 | Foam pack tube (ends) |
ings of the four layer foam packing material. The foam | |||
with the tubes located inside are placed into the Amplifier | 2 | 034265 | Foam pack tube (inside with |
Tube Cover and secured to the Chassis. Failure to do this |
|
| tube cutouts) |
will result in damage to the Vacuum Tubes and possibly the | 1 | 034006 | Shipping carton inside |
MC275. | |||
It is very important that the four plastic feet are attached to | 1 | 033707 | Top pad |
the bottom of the equipment. This will ensure the proper | 1 | 033712 | Foam pad (tube cover) |
equipment location on the bottom pad. Failure to do this | 1 | 033704 | Bottom pad |
will result in shipping damage. | 1 | 033705 | Front pad |
Use the original shipping carton and interior parts only | 1 | 033706 | Rear pad |
if they are all in good serviceable condition. If a shipping | 1 | 033711 | Side pads |
carton or any of the interior part(s) are needed, please call | 4 | 017862 | Plastic foot |
or write Customer Service Department of McIntosh Labo- | |||
ratory. Please see the Part List for the correct part numbers. |
|
|
|
15