Denon AVR-4802 manual Display, Notes

[3] Outputting a program source to an amplifier, etc., in a different room (MULTI mode)

1	Press the REC/MULTI button until “M-	REC / MULTI
	ZONE SOURCE” appears on the set’s

display.

(Main unit)

2	Select the source you want to record
	appears on the set’s display.

• The MULTI indicator lights.

• The indicator for the selected program source light.

• When the AVR-4802 is in the REC OUT mode, the source cannot be output using the M-ZONE 1 buttons on the remote control unit.

SELECT

(Main unit)

	1, 4	2
Display	2

PHONO CD	TUNER	DVD	/	VDP TV / DBS
VCR -1	-2 -3	V.AUX MD	/	TAPE

3	Start playing the source to be output.
	• For operating instructions, refer to the manuals of the
	respective components.
4	To cancel, press the REC/MULTI button	REC / MULTI
	and select “SOURCE”.

When “Multi” is selected for the system setup’s multi-zone setting, the source selected here is output from the SB/MULTI speaker terminals.

The volume can be adjusted and the input source can be selected using the VOLUME UP and VOLUME DOWN buttons on the remote control unit’s “M-ZONE 1” page.

(Main unit)

NOTES:

•The signals of the source selected in the Multi mode are also output from the TAPE and VCR recording output terminals.

•Digital signals are not output from the MULTI ZONE audio output jacks.

37