Denon AVR-4802 manual Playback using the external input EXT. in jacks

Playback using the external input (EXT. IN) jacks

1	Set the external input	EXT. IN
	(EXT. IN) mode.
	Press the EXT. IN (on the
	EXT. IN button on the remote
	control unit) to switch the
	external input.	(Main unit)	(Remote control unit)

Once this is selected, the input signals connected to the FRONT-L , FRONT-R, CENTER, SURR.-L (surround left) and SURR.-R (surround right) channels of the EXT. IN jacks are output directly to the front (left and right), center and surround (left and right) speaker systems as well as the pre-out jacks without passing through the surround circuitry.

In addition, the signal input to the SW (subwoofer) jack is output to the PRE OUT SW (subwoofer) jack.

When EXT. IN is selected, the input signals connected to the EL (effect left) and ER (effect right) jacks are output to the PRE OUT (SBL and SBR) jacks.

2	Cancelling the external input mode
	To cancel the external input (EXT. IN) setting, press the INPUT
	MODE or ANALOG button to switch to the desired input
	mode.
	INPUT MODE	ANALOG

2	1
2
2
1

(Main unit) (Remote control unit)

•When the input mode is set to the external input (EXT. IN), the play mode (DIRECT, STEREO, DOLBY/DTS SURROUND, HOME THX CINEMA, WIDE SCREEN, 5CH/7CH STEREO or DSP SIMULATION) cannot be set.

NOTES:

•In play modes other than the external input mode, the signals connected to these jacks cannot be played. In addition, signals cannot be output from channels not connected to the input jacks.

•The external input mode can be set for any input source. To watch video while listening to sound, select the input source to which the video signal is connected, then set this mode.

38