Denon AVR-4802 manual DSP surround simulation

DSP surround simulation

1	Select the surround mode for the input channel.
			SURROUND MODE
			WIDE	5CH / 7CH	DSP
	DIRECT	STEREO DOLBY / DTS SCREEN		STEREO	SIMULATION

(Main unit)

The surround mode switches in the following order each time the DSP SIMULATION button is pressed:

WIDE SCREEN SUPER STADIUM ROCK ARENA

JAZZ CLUB CLASSIC CONCERT

MATRIX MONO MOVIE

“WIDE SCREEN” is not displayed when the operation is performed with the buttons on the main unit.

3

1

1

2, 4

3

2	Display the surround parameter screen on the monitor.
	The screen for the selected surround mode appears.
	(Remote control unit)

3

4

Press the CURSOR/PAGE button to highlight the display, then use the jog stick to set the parameters.

(Remote control unit)

Press the CURSOR/PAGE button so that the display is no longer highlighted, then press the “SURR. PARA” button to complete the setting.

(Remote control unit)

NOTES:

•When “Default” is selected and the jog stick is moved to the left, “CINEMA EQ.” and “D. COMP.” are automatically set to “OFF”. In addition, “ROOM SIZE” is set to “medium”, “EFFECT LEVEL” to “10” and “DELAY TIME” to “30ms”.

•The “ROOM SIZE” expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual size of the listening room.

53