CAUTION!

•The master volume is set to “–30 dB” when test tones are output.

•The test tones are for confirming the low frequency playback limits and are played at an extremely high level. When using a low output subwoofer, be very careful about irregular operations exceeding clipping by for example turning down the subwoofer’s attenuator before starting then slowly turning the attenuator up to the listening level.

•Also, when the subwoofer is set to “No” in the speaker configuration, the test tones are output from the front speakers. When using front speakers with low input resistance, check that the sound is not clipped at sections where the signal is strong on the CD music source before starting the peak limit setting. The peak limit setting should not be performed if the music source cannot be played with the master volume set at “–15”. Set the front speakers to “Small” and the subwoofer to “Yes” in the speaker configuration. When this is done, the low frequencies are cut, so the effect is insufficient. We strongly recommend adding a subwoofer.

•If the test tone is clipped when it is set to “–18 dB”, set the peak limit to “–18 dB”. In this case, the input resistance of the subwoofer or front speakers is insufficient so clipping may occur when playing music. We recommend switching to a subwoofer with a higher input resistance.

Setting the Digital In Assignment

•This setting assigns the digital input jacks of the AVR-4802 for the different input sources.

1

At the System Setup Menu select “Digital In Assignment”.

 

2

3

4

Switch to the Digital In Assignment screen.

Select the digital input jack to be assigned to the input source.

• To select the input source

•To select the digital input jack

Select “OFF” for input sources for which no digital input jacks are used.

If “Yes” is selected for “Default”, the settings are automatically reset to the default values.

Enter the setting.

The System Setup Menu reappears.

NOTES:

•The OPTICAL 4 and 5 jacks on the AVR-4802’s rear panel are equipped with an optical digital output jack for recording digital signals on a DAT deck, MD recorder or other digital recorder. Use this for digital recording between a digital audio source (stereo - 2 channel) and a digital audio recorder.

•Do not connect the output of the component connected to the OPTICAL 4 OUT jack on the AVR-4802’s rear panel to any jack other than the OPTICAL 4 IN jack.

•Do not connect the output of the component connected to the OPTICAL 5 OUT jack on the AVR-4802’s rear panel to any jack other than the OPTICAL 5 IN jack.

•“PHONO” and “TUNER” cannot be selected on the Digital In Assignment screen.

29

Page 28 Page 30
Page 29
Image 29
Denon AVR-4802 manual Setting the Digital In Assignment
Page 28 Page 30

AVR-4802 specifications

The Denon AVR-4802 is a premium home theater receiver that has garnered a reputation for delivering exceptional audio and video performance. Launched as part of Denon's celebrated line of A/V receivers, the AVR-4802 exemplifies the brand's commitment to quality and innovation in the realm of home entertainment.

One of the key features of the AVR-4802 is its robust amplification capability. It provides a powerful 110 watts per channel, allowing users to enjoy a dynamic and impactful soundstage. The receiver is equipped with multiple channels, which facilitates a fully immersive surround sound experience, accommodating various speaker configurations, including traditional 5.1 and more advanced setups like 7.1 surround sound.

The AVR-4802 incorporates cutting-edge surround sound processing technologies, including Dolby Digital and DTS, ensuring high-fidelity audio reproduction for both movies and music. Additionally, it supports 24-bit/192kHz audio playback, which enhances the detail and clarity of sound, making it suitable for both casual listeners and audiophiles.

In terms of video capabilities, the AVR-4802 supports high-quality video formats, including progressive scan for smoother images, and it features multiple video inputs, including S-Video and composite connections. This versatility allows users to connect various devices, such as DVD players and gaming consoles, simplifying the integration of a comprehensive home theater system.

The receiver also comes with advanced DSP (Digital Signal Processing) algorithms that optimize audio output based on the environment, providing an improved listening experience regardless of the room's acoustics. This feature further enhances the AVR-4802's appeal to home theater enthusiasts looking for customizability.

Another outstanding characteristic of the AVR-4802 is its user-friendly interface, featuring a comprehensive on-screen display that simplifies setup and operation. It includes a remote control that offers convenient access to all functionalities, making navigation through various settings intuitive.

Additionally, the AVR-4802 is equipped with multiple digital and analog inputs, which provides flexibility in connecting other audio and video components. The receiver's build quality is also noteworthy, reflecting Denon's attention to detail, ensuring durability and performance.

Overall, the Denon AVR-4802 is a well-rounded A/V receiver that combines power, advanced technologies, and user-friendly features to create an ideal centerpiece for any home theater system, offering an unparalleled entertainment experience for users who appreciate high-quality sound and video.
Top Page Image Contents