Denon AVR-4802 manual Specifications, 2Audio section, Dynamic power Output terminals Analog

17 SPECIFICATIONS

2Audio section

•Power amplifier Rated output:

Dynamic power:

Output terminals:

•Analog

Input sensitivity / input impedance: Frequency response:

S/N:

Distortion: Rated output:

•Digital

D/A output:

Digital input:

•Phono equalizer (PHONO input — REC OUT) Input sensitivity:

RIAA deviation: Signal-to-noise ratio:

Rated output / Maximum output: Distortion factor:

2Video section

•Standard video jacks

Input / output level and impedance: Frequency response:

•S-video jacks

Input / output level and impedance: Frequency response:

•Color component video terminal Input / output level and impedance:

Frequency response:

2Tuner section

Receiving Range:

Usable Sensitivity:

50 dB Quieting Sensitivity:

Signal to Noise Ratio (IHF-A):

Total Harmonic Distortion (at 1 kHz):

2General

Power supply:

Power consumption:

Maximum external dimensions:

Mass:

2Remote control unit (RC-8000) Batteries:

External dimensions: Mass:

Front:	125 W + 125 W		(8 Ω	/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
	150 W + 150 W		(6 Ω	/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
Center:	125 W + 125 W		(8 Ω	/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
	150 W + 150 W		(6 Ω	/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
Surround:	125 W + 125 W		(8 Ω	/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
	150 W + 150 W		(6 Ω	/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
Surround Back	125 W + 125 W		(8 Ω	/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
/Multi:	150 W + 150 W		(6 Ω	/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
170 W x 2 ch	(8 Ω	/ohms)
270 W x 2 ch	(4 Ω	/ohms)
350 W x 2 ch	(2 Ω	/ohms)

Front/Center/Surround Back:		6 ~ 16 Ω	/ohms
Surround:	A or B	6 ~ 16 Ω	/ohms
	A + B	8 ~ 16 Ω	/ohms
200 mV /	47 kΩ /kohms

10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode) 105 dB (DIRECT mode)

0.005% (20 Hz ~ 20 kHz) (DIRECT mode)

1.2 V

Rated output — 2 V (at 0 dB playback)

Total harmonic distortion — 0.005% (1 kHz, at 0 dB)

S/N ratio — 110 dB

Dynamic range — 108 dB

Format — Digital audio interface

2.5 mV

±1 dB (20 Hz to 20 kHz)

74 dB (A weighting, with 5 mV input)

150 mV / 8 V

0.03% (1 kHz, 3 V)

1 Vp-p, 75 Ω /ohms

5 Hz ~ 10 MHz — +0, –3 dB

Y (brightness) signal — 1 Vp-p, 75 Ω /ohms C (color) signal — 0.286 Vp-p, 75 Ω /ohms 5 Hz ~ 10 MHz — +0, –3 dB

Y (brightness) signal — 1 Vp-p, 75 Ω			/ohms
PB/CB (blue) signal		— 0.7 Vp-p, 75 Ω	/ohms
PR/CR (red) signal		— 0.7Vp-p, 75 Ω /ohms
DC ~ 50 MHz — +0, –3 dB
[FM] (note: µV at 75 Ω /ohms, 0 dBf = 1 x 10–15W)				[AM]
87.5 MHz ~ 107.9 MHz				520 kHz ~ 1710 kHz
1.0 µV (11.2 dBf)				18 µV
MONO	1.6 µV (15.3 dBf)
STEREO	23 µV (38.5 dBf)
MONO	79 dB			50 dB
STEREO	74 dB
MONO	0.15%
STEREO	0.3%

AC 120 V, 60 Hz 10.5 A

434 (W) x 179 (H) x 485 (D) mm (17-3/32” x 7-3/64” x 19-3/32”) 20.5 kg (45 lbs 3.1 oz)

LR6/AA Type (four batteries)

96 (W) x 38 (H) x 168.5 (D) mm (3-25/32” x 1-1/2” x 6-41/64”) 242 g (Approx. 8.5 oz) (not including batteries)

* For purposes of improvement, specifications and design are subject to change without notice.

71