Denon AVR-4802 manual Select the input source

Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)

1	Select the input source.
	Playback with digital input

q Select an input source set to digital (COAXIAL/OPTICAL) (see page 29).

INPUT SELECTOR

(Main unit) (Remote control unit)

wSet the input mode to “AUTO”.

1-q3 3

INPUT MODE

(Main unit)(Remote control unit)

2	Select the Surround mode.
	DOLBY / DTS

(Main unit)(Remote control unit)

3	Play a program source with the				,	mark.
	DIGITAL		• The Dolby Digital indicator lights
				when playing Dolby Digital sources.
		Light
			•	The DTS indicator lights when playing
				DTS sources.
		Light
	SIGNAL		•	The SIGNAL DETECT indicator lights
	DETECT			when playing	sources	on which	a
		Light
				special identification		signal	is

recorded.

	1-w2
	2
1-q	2
	4, 5
	5, 6

1-w

5

4	Display the surround parameter
	menu.
	(Remote control unit)

5

6

Press the CURSOR/PAGE button to highlight the display, then use the jog stick to set the parameters.

(Remote control unit)

Press the CURSOR/PAGE button so that the display is no longer highlighted, then press the “SURR. PARA” button to complete the setting.

(Remote control unit)

NOTE:

•When “Default” is selected and the jog stick is moved to the left, “CINEMA EQ.” and “D.COMP.” are automatically turned off, “SB CH OUT” is reset, “CHANNEL LEVEL” and the tone is set to the default value.

47