Denon AVR-4802 manual Setting the THX Surround EX / DTS-ESSource Auto, Notes

Setting the THX Surround EX / DTS-ES Source Auto

Set the operation for the digital signals when playing in the 6.1 SURROUND, DTS-ES and THX SURROUND EX surround modes.

1	At the System Setup Menu select “SB CH Auto Flag
	Detect” and press the ENTER button.

2

3

Select the desired setting.

When set to “ON”, the operation for software for which no identification signals are recorded is set.

Enter the setting.

The System Setup Menu reappears.

THX surround EX/DTS ES Auto Flag Detect Mode (AFDM) setting

ON	This function only works with software on which a special identification signal is recorded.
	This is a function for automatically playing in the 6.1-channel mode using the surround back speakers if the software is recorded
	in THX Surround EX or DTS-ES or in the normal 5.1-channel mode without using the surround back speakers when the software
	is not recorded in THX Surround EX or DTS-ES.
OFF	Set the “OFF” mode to perform 6.1-channel playback with conventional 5.1-channel sources or sources on which the
	identification signal described below is not recorded.
Non-Flag Source SB ch Output setting
THX surround EX/DTS ES		..........Playback is conducted using the surround back speaker.
		Surround back channel is reproduced using digital matrix processing.
Non MTRX	Playback is conducted using the surround back speaker. The same signals as those of the surround channels are output from
	the surround back channel.
OFF	Playback is conducted without using the surround back speaker.

NOTES:

•The “SB CH Auto Flag Detect” setting screen is displayed when the surround back speaker is set to “Large” or “Small” at “Speaker Configuration”.

•The surround back speakers can also be turned on and off using the “SB CH OUT” surround parameter. (See pages 55.) Select the setting according to the program source to be played.

22