Denon AVR-4802 manual Listening To The Radio, Auto tuning, Manual tuning

12 LISTENING TO THE RADIO

To operate the tuner by remote control, switch the remote control device to “TUNER”.

Auto tuning

1	Set the input function to “TUNER”.		1
	INPUT SELECTOR
	(Main unit)	(Remote control unit)
2	Watching the display, press the BAND button to select the
	desired band (AM or FM).

	(Remote control unit)
3	Press the MODE button to set the auto tuning mode.
	“Auto” appears on the display.
	(Remote control unit)
4	Press the TUNING UP or DOWN button.

Automatic searching begins, then stops when a station is tuned in.

(Remote control unit)

If tuning does not stop at the desired station, use to the “Manual tuning” operation.

Manual tuning

1	4
	2

4

3

1	Set the input function to “TUNER”.
	INPUT SELECTOR
	(Main unit)	(Remote control unit)
2	Switch the remote control device to “TUNER”.
	Watching the display, press the BAND button to select the

desired band (AM or FM).

(Remote control unit)

3	Press the MODE button to set the manual tuning mode.
	Check that the display’s “AUTO” indicator turns.

	(Remote control unit)
4	Press the TUNING UP or DOWN button to tune in the desired
	station.
	The frequency changes continuously when the button is held

in.

(Remote control unit)

NOTES:

•When in the auto tuning mode on the FM band, the “STEREO” indicator lights on the display when a stereo broadcast is tuned in. At open frequencies, the noise is muted and the “TUNED” and “STEREO” indicators turn off.

•When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the “STEREO” indicator turns off.

57