Denon AVR-4802 manual Setting the multi-zonelevel, Variable, 40dB, 0 dB

4	Select “Surround Back” to use as the surround back
	channel, “Multi” to use as multi-zone, then press jog
	stick “ENTER”.

When “Surround Back” is selected When “Multi” is selected

[2] Setting the multi-zone level

1 At the System Setup Menu, select “Multi Zone Control”.

2 Press jog stick “ENTER” to switch to the “Multi Zone Control” screen.

NOTE: The multi zone volume level is not displayed when “Multi” is selected at the “Power

Amp Assignment” setting.

3	Select “Multi Zone Vol. Level” then press jog stick “ENTER”.
4	Select the desired setting, then press jog stick “ENTER”.

Variable:

The level can be adjusted freely using the buttons on the remote control unit (M. ZONE 1 4/5,

VOLUME UP and VOLUME DOWN).

-40 dB, 0 dB:

The output level is fixed at the set level and the volume can no longer be adjusted.

25