|
|
|
| Packing Instructions |
|
|
|
|
|
Packing Instructions |
|
|
| |
|
|
|
|
|
In the event it is necessary to repack the equipment for | Quantity | Part Number | Description | |
shipment, the equipment must be packed exactly as shown | 1 | 033888 | Shipping carton only | |
below. It is very important that the four plastic feet are at- | 4 | 033887 | End cap (Foam pad) | |
tached to the bottom of the equipment. Three #10 x |
|
|
| |
screws and washers must be used to fasten the unit securely | 1 | 033697 | Inside carton only | |
to the bottom pad and wood skid. This will ensure the | 1 | 033725 | Top Pad | |
proper equipment location on the bottom pad. Failure to do | 1 | 034008 | Bottom pad | |
this will result in shipping damage. | 2 | 017218 | Plastic foot (spacer) | |
Use the original shipping carton and interior parts only | 1 | 033699 | Wood skid | |
if they are all in good serviceable condition. If a shipping | 2 | 101169 | #10 x | |
carton or any of the interior part(s) are needed, please call | 2 | 104033 | #10 x | |
or write Customer Service Department of McIntosh Labo- |
|
|
| |
ratory. Please see the Part List for the correct part numbers. | 4 | 017218 | Plastic foot | |
|
| 4 | 100159 | |
|
| 4 | 104083 | #10 x 7/16” Flat washer |
|
| 1 | 040572 | Shipping carton complete with |
|
|
|
| all the above parts |
15
