Manuals / McIntosh / Home Audio / Speaker System

McIntosh XRT2K owner manual Final Assembly of the Loudspeaker

Models: XRT2K

1 24
Download 24 pages 37.45 Kb
Page 10
Image 10
HEX Head Screws
Upper Woofer Column
HEX
Head
Bolts

Low Frequency Column (Upper Section). Refer to fig- ure 3.

3. Carefully push together the two Low

Lower Woofer

Column

Openings for pins

Figure 3

Frequency Columns (Lower and Upper Sections).

4.Using the socket tool, tighten the four hex head bolts until the Low Frequency Column (Lower and Upper Sections) is pulled together with no space between the two sections.

Final Assembly of the Loudspeaker

1.Locate the previously removed protective blue cloth covers and drape them over the top of the Low Fre-

quency Column (Lower and Upper Sections), to tempo-

Blue protective cloth covers

Figure 4

rarily protect the Woofers. Refer to figure 4.

2.Place four pieces of foam packing material removed from the Midrange/High Frequency Column Shipping Carton, on top of the cloth covers placed in step 1. Re-

fer to figure 5.

End piece of foam

Center pieces of foam

Figure 5

3.Locate the Midrange/High Frequency Column and place it on top of the foam packing material placed in step 2, making sure the end with the draw cords is placed near the base end of the Low Frequency Column and the Grille is facing upwards. Refer to figure 6.

Socket and Cable

Midrange/Tweeter Column in cloth cover

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 6

4.Untie the cloth cover draw cords on the Midrange/High Frequency Column and push up the cover about six inches (15.24cm). Using the supplied “T” handle tool remove the hex head screws from the bottom of the col- umn. These screws will be used later to fasten the Col- umn to base in step number 8. Refer to figure 8.

5.Locate the cable coming from inside the Low Frequency Column base and orient it to match up with the socket located on the rear of the Midrange/High Frequency Column.

6.Insert the plug into the socket and rotate the locking col- lar clockwise until it is finger tight.

7.Remove the end piece of foam, leaving the three center pieces of on top of the Low Frequency Column. Refer to figure 5. Then reposition the bottom of the Midrange/ High Frequency Column to fit into the channel opening of the Low Frequency Column base. Refer to figure 7.

Figure 7

8.Using the previously removed hex head screws and “T” handle tool, fasten the Midrange/High Frequency Col- umn to the metal plate part of the Low Frequency Col- umn base. Refer to figure 8.

9.Position the Loudspeaker System upright rest-

ing on its base.

Note: Do not lift up

 

on the

 

Midrange/

 

High

 

Frequency

Figure 8

Column.

10. Remove the three center foam packing materials and

the three protective blue cloth covers.

11.Remove the protective blue cloth cover from the Low Frequency Column Grille and attach the Grille to the Low Frequency Column.

10

Page 9 Page 11
Page 10
Image 10
McIntosh XRT2K owner manual Final Assembly of the Loudspeaker
Page 9 Page 11

XRT2K specifications

The McIntosh XRT2K stands as a monumental achievement in the world of high-fidelity loudspeakers, reflecting the brand's commitment to superior sound engineering and aesthetic design. Known for its distinctive look and powerful performance, this model blends cutting-edge technology with timeless craftsmanship, appealing to audio enthusiasts and professionals alike.

One of the most significant features of the XRT2K is its innovative speaker configuration. The design incorporates an array of drivers, including a high-frequency section with multiple tweeters that ensure detailed, clear highs. This is complemented by mid-range drivers that provide a full-bodied representation of vocals and instruments. The lower section features powerful woofers designed to deliver deep, controlled bass, creating a three-dimensional soundstage that envelops listeners.

The XRT2K utilizes McIntosh's proprietary techniques, such as its advanced driver alignment, which ensures precise timing and phase coherence across the audio spectrum. This results in an immersive listening experience where every note is accurately reproduced, maintaining the integrity of the original recording. The speaker’s unique design also minimizes unwanted resonances and distortions, allowing for a cleaner and more accurate sound.

Another standout characteristic of the XRT2K is its broad frequency response, which enables it to reproduce a wide range of musical genres effortlessly. Whether one is enjoying classical music with its intricate detail or high-energy rock tracks with throbbing bass, the XRT2K can handle it all without compromise. The depth of the soundstage is further enhanced by the speaker's ability to convey spatial information, allowing listeners to feel as though they are in the same room as the performers.

In terms of aesthetics, the XRT2K epitomizes luxury. Its sleek, modern design is complemented by iconic McIntosh styling, featuring glass panels, polished aluminum, and the signature blue VU meters. This not only makes it a visually striking addition to any audio setup but also matches well with high-end AV systems and home theaters.

Overall, the McIntosh XRT2K is a remarkable fusion of technology, craftsmanship, and design. With its advanced driver technology, meticulous engineering, and striking aesthetics, it stands out in the luxury audio market, promising an unparalleled listening experience that can satisfy the most discerning audiophiles.