– 7 –

ALIGNING THE VIEWFINDER

The wide field of view provided by the 5 x 24mm viewfinder (17, Fig. 1) permits easy object sighting prior to observation in the higher-power main telescope. To align the viewfinder, follow this procedure:

1.First remove the dust cap (21, Fig. 1, not visible in photo) from the dew shield/lens shade (22, Fig. 1). Then using the lowest power (25mm) eyepiece, point the main telescope at some well defined land target (e.g. the top of a telephone pole) at least 200 yards distant.

2.Look through the viewfinder and tighten or loosen, as appropriate, the viewfinder’s 6 collimation screws (16, Fig. 1 and Fig. 4), until the cross hairs of the viewfinder are precisely centered on the same object already centered in the main instrument’s field of view. Hint: Center the front of the viewfinder in the bracket using the 3 front ring thumbscrews, then make final object centering adjustments with the 3 back ring thumbscrews.

3.With this alignment accomplished, objects located first in the wide-field viewfinder will then be centered in the main telescope’s field of view. Focusing of objects in the viewfinder is accomplished by turning the threaded eyepiece of the viewfinder. (Note: The viewfinder presents an image which is upside-down; this is customary in all astronomical viewfinders).

BALANCING THE TELESCOPE

In order for the telescope to move smoothly on its mechanical axes, it must first be balanced as follows:

Note: If the counterweight is positioned as recommended on the previous page—the telescope is already approximately balanced.

1.Loosen the Right Ascension lock (26, Fig. 1). With the R.A. lock loosened, the telescope mount will turn freely about the polar axis. Rotate the telescope about the polar axis so that the counterweight shaft (30, Fig. 1) is parallel to the ground (horizontal).

2.Loosen the counterweight’s locking thumb screw (29, Fig. 1) and slide the counterweight (28, Fig. 1) along the shaft until the telescope remains in any given position without tending to drift up or down the polar axis. Then retighten the counterweight lock.

The telescope is now balanced.

UNDERSTANDING CELESTIAL MOVEMENTS AND COORDINATES

Understanding where to locate celestial objects and how those objects move across the sky is the key to enjoying the hobby of astronomy. Most amateur astronomers practice “star-hopping” to locate celestial objects. They use star charts or astronomical software to identify bright stars and star patterns as “landmarks” in their search for astronomical objects. Another technique for locating objects is use the setting circles that are provided on your telescope. See Step #6, page 9.

Understanding how astronomical objects move: Due to the Earth’s rotation, celestial bodies appear to move from East to West in a curved path through the skies.

All stars and celestial objects are mapped onto an imaginary sphere surrounding the Earth. This mapping system is similar to the system of latitude and longitude on Earth surface maps.

In mapping the surface of the Earth, lines of longitude are drawn between the North and South Poles and lines of latitude are drawn in an East-West direction, parallel to the Earth’s equator. Similarly, imaginary lines have been drawn to form a latitude and longitude on the celestial sphere. These lines are known as Right Ascension and Declination. The path an object follows through the sky is known as Right Ascension (R.A.). The angle of this path an object follows is known as Declination (Dec.).

The celestial map also contains two poles and an equator just like a map of the Earth. The celestial poles are defined as those two points where the Earth’s North and South poles, if extended to infinity, would cross the celestial sphere. Thus, the North Celestial Pole (see Fig. 8) is that point in the sky where the North Pole intersects the celestial sphere. The North Star, Polaris, is located very near the North Celestial Pole. The celestial equator is a projection of the Earth’s equator onto the celestial sphere.

So just as an object's position on the Earth’s surface can be located by its latitude and longitude, celestial objects may also be located using Right Ascension and Declination. For example: You can locate Los Angeles, California, by its latitude (+34°) and longitude (118°). Similarly, you can locate the Ring Nebula

Page 6 Page 8
Page 7
Image 7
Meade 60EQ-A Aligning the Viewfinder, Balancing the Telescope, Understanding Celestial Movements and Coordinates
Page 6 Page 8

60EQ-A specifications

The Meade 60EQ-A is a remarkable entry-level telescope that opens the universe to beginner astronomers and enthusiasts alike. With its combination of quality optics, ease of use, and robust features, this telescope makes stargazing accessible and enjoyable for all.

One of the standout features of the Meade 60EQ-A is its 60mm aperture. This allows for adequate light-gathering capability, enabling users to observe celestial objects such as the Moon, Saturn’s rings, and even some deep-sky objects like star clusters and nebulae. The telescope comes with two quality eyepieces—MA 9mm and MA 25mm—providing different magnifications for diverse viewing experiences. The 25mm eyepiece offers wider fields of view, making it perfect for observing larger celestial objects, while the 9mm eyepiece enhances detail in more distant objects.

A key technology employed in the Meade 60EQ-A is its fully coated optics. This feature enhances light transmission, resulting in brighter and clearer images. The telescope is engineered with high-quality glass and features a refractor design, which is known for its ability to produce sharp images with minimal chromatic aberration.

The telescope is mounted on a sturdy equatorial mount, which is essential for tracking celestial movements smoothly. The equatorial design means that once the telescope is aligned with the North Star, it can easily follow the motion of celestial objects as they move across the night sky. This feature greatly enhances the viewing experience, making it easier to observe planets and stars over extended periods.

Another advantage of the Meade 60EQ-A is its lightweight design, allowing for easy portability. It can be set up quickly, making it ideal for both backyard usage and trips to darker locations outside the city.

In addition, the telescope comes with an included smartphone adapter. This innovative accessory allows users to capture images of the night sky using their mobile devices, bridging the gap between traditional stargazing and modern technology.

In conclusion, the Meade 60EQ-A is a well-equipped telescope that combines quality optics, user-friendly features, and excellent portability. Whether you are a novice looking to explore the wonders of the universe or an experienced stargazer seeking a reliable instrument, the Meade 60EQ-A provides a fantastic platform for astronomical observations. Its robust construction, easy setup, and impressive features make it a valuable addition to any aspiring astronomer’s arsenal.
Top Page Image Contents