Installation Menu
Tuner 1 Setup
Antenna Number:
Each tuner can receive from up to four satellites. Use the buttons to select the position to which you want to assign a new or different satellite.
Satellite Name:
Press to access the list of available satellites. Select the satellite
you want using the buttons and confirm your selection with . Make sure your reception system is aligned to the selected satellite.
LNB Frequency:
Use the buttons to select the LNB frequency applicable to
your reception system or press to view the same listing as on first installation, containing the most common variants as follows.
-Single (LNB Low frequency 9750 MHz)
-Dual (LNB Low frequency 9750 MHz + LNB High frequency 10600 MHz)
-Universal (LNB Low frequency 9750 MHz + LNB High frequency 10600 MHz + Limit frequency 11700 MHz)
Use the buttons to make your selection. To confirm your selection use the buttons to select “OK” and press .
22kHz Control:
Use the buttons to make your selection (On/Off). The 22kHz signal is needed to switch LNBs in multifeed reception and to switch between Low and High band.
89
