Recording
Recording Direct to Hard Disk Immediately/Later
If there is an overlap with
another scheduled or ongoing recording, the fact is indicated. The receiver then presets the end time for your new recording as the start time of the overlapping programme (see “Duration/ End” at the right).
Start
Press the red button. The following display appears:
-You can start recording the programme immediately. Use the
buttons to move to the “Start Record” field and use the buttons to select “Immediate”.
-You can also start recording at a later time. Move the buttons
to the “Start Record” field and use the buttons to select the time after which you want recording to start. You can choose between 1 minute and 119 minutes, in 1 minute increments.
Duration/End
You can specify the duration of a recording regardless of when it starts. The receiver automatically retrieves the end time of the programme you are currently viewing from the EPG data (where available) and inserts it in the “Duration” field. Otherwise the end time is based on the default duration you set on the “User Preference” menu under “PVR Setup”. If your programmed recording overlaps with another scheduled recording, the end time of the current recording is matched to the start time of the one already scheduled. To change the recording duration,
use the buttons to move to the “Duration” field and use the buttons to select the time after which you want recording to stop
automatically. Press to shorten the recording by 10 minutes and to extend it by 10 minutes.
When you have finished making your settings, use the buttons to
select “OK” and press to start recording. If the end time still overlaps with the start time of a scheduled recording, the receiver automatically switches to the
69
