Kathrein UFS 821si, UFS 821sw Encoded channels, Channel Search, FTA CA Select, Network Search

First Installation

Number of channels in the pre-programmed channel list

Encoded channels

can only be decoded with a CA module and matching Smartcard. CA modules and Smartcards are not included in the product package. Please contact your Pay-TV provider.

Use the  buttons to make the settings.

Channel Search

Use the  buttons to select whether you want to use the factory default channel list or whether you want to search for more/new channels.

FTA CA Select:

-All: FTA (free-to-air) and encoded channels are searched for

-FTA: Only free-to-air channels, such as ZDF in Germany, are searched for

-CA: Only encoded channels, such as Austria’s ORF, are searched for

Network Search

If you set the network search to “Off”, only the factory stored transponders of the satellites you previously selected will be scanned for new as yet unlisted channels.

If you set the network search to “On”, the transponder network enables additional transponders that have not yet been stored to be located. They are then stored and scanned for new channels in the same way as the existing transponders.

Press  to start the channel search, or if you set the channel search to “Off” you are guided straight to the next item in the first installation process.

If the search is successful, you see the following message (example):

Press  to confirm storing of the newly found channels and move on to the next step in first installation.

19