Recording List
The receiver automatically starts playing back the recording. You now have several options for specifying the range to be cut (see example bar):
Start
Middle
End
You can only remove one block from the recording in each cut operation. To remove multiple blocks you have to repeat the process.
To set the exact times for the start and end markers as quickly as possible you can use various buttons as aids:
-Press to stop playback and freeze the frame
-Use the buttons to rewind or fast forward at up to 24 times playback speed (you can only fast forward recordings which have not yet decoded at 4 times playback speed and rewind them at 8 times playback speed)
-Use the buttons to jump forward or back in
Cut the range marked “Start” as follows:
-Move to the end of the range you want to cut and press . Then
press to set the start point marker of the range to be cut. The receiver automatically marks the full range back to the start of
recording. Then press to set the end marker at the end of the recording range you want to cut.
Cut the range marked “Middle” as follows:
-Move to the start of the range you want to cut and press . Then press to set the start marker and move forward to the end of the cut range. Press again and to set the end marker.
Cut the range marked “End” as follows:
-Move to the start of the range you want to cut and press . Then
press to set the start marker and press to automatically select the full range to the end of the recording.
Press to remove the selected range from the recording, or press to reset the markers.
76
