Connecting up the Video/PVR
For details of how to connect your external recorder to the receiver refer to the connection diagram provided at the end of this manual and the instructions for the external recorder.
Recording
In order to make a VCR recording (Record), the satellite receiver must be switched on or the timers must be
Playback
Note:
For VCR/PVR playback (Play), the UFS 821 must be set to “Standby”, so that the signal path is switched through from the VCR or PVR/AUX Scart socket to the TV Scart socket.
You must first set the Scart socket of the UFS 821 to “AUX” with
the button while the receiver is in operation in order for your TV set to automatically play back the picture from the external recorder.
In this setting, the picture from the external recorder is switched through
to the TV set during playback. Pressing again restores priority to the signal from the UFS 821.
For system reasons the TV and VCR Scart sockets carry the same signal!
98
