User Preference
Prompt on Recording
Use the buttons here to select whether to enable
display of the advanced recording settings on starting (press button) or not. If you select “Disable”, in manual recording mode, time- shift recording is automatically started (see “Recording” section). Other recording modes are then excluded.
Default Record Duration
Use the buttons here to select the default recording time. If you forget to stop a recording you started manually, it is automatically stopped by the receiver when the default recording time elapses. You can choose between 30 minutes and 4 hours, in 30 minute increments.
Save
When you have made all the settings, press to save them.
EPG Grabbing Setup
On this menu use the buttons to set the time at which you want the UFS 821 to update the EPG data. The receiver (which must be in Standby mode) switches on from Standby, updates the data and then returns to Standby. Scheduled recordings do not affect this; the receiver then carries out the update automatically later when recording is finished.
Invalidate tvtv-Data
On this menu you can use the button to delete the stored tvtv data. You can then have the UFS 821 update the tvtv data at the selected
time or press to switch your receiver to Standby. The receiver automatically starts updating the tvtv data. The progress of the tvtv data update is indicated
by pressing the button.
43
