Kathrein UFS 821sw, UFS 821si manual Programming a Recording

TVTV EPG and Timer

You can use the  buttons to switch to the details on the next

programme in the selected view. Press  to return to the previous display, such as the programme list.

Programming a Recording

A time window of two minutes at the beginning and five minutes at the end is automatically set.

If there are no EPG data available for the channel you selected:

Select the channel for which you want to programme a recording in the “Current” view and press

the red  button. As there is no EPG data, you must enter the data (date, start, end) manually. Enter the data using the cursor

() and number pad. Press  to save your settings.

You can programme a recording from the various views of the EPG (“Current”, “Programme list”, “Highlights” and “Det.inform.” [Details]) and from within their various sub-menus. When programming

recordings, the EPG automatically adapts to the actual SAT IF input signal mode (Single/Loop Through/Double Tuner). Example: If you are operating the UFS 821 in loop-through mode, you cannot simultaneously record one programme on the ARD channel and one on the ProSieben channel, because the two channels are not transmitted on the same transponder.

Use the arrow buttons () to select the programme you want and press the red  button. The following display appears (example):

60