12 13
Before InstallationE E
Precautions for Installation and Use Installation Examples
✔Please check whether the installation site can sufficiently support the weight of
the Camera before installation.
✔Make sure that the cable is not caught on anything or its insulation sheath is
not removed. (Neglecting to do so may cause fire or damage to the product.)
✔Prevent people from approaching the installation area, where objects might fall
during installation. Move valuables to a safe location before installation.
✔Install in a cool place and away from direct sunlight.
Be sure not expose the Camera to direct sunlight even during use or
storage. Use the BLC function when operating the Camera underneath a
spot light or under very bright lights.
✔Use only in an area where temperature and humidity are kept within the limits
specified below:
- Operating Temperature: -10°C ~ +50°C (14°F~122°F)
- Humidity: Below 90%
✔Use only the power source specified below:
- Power Consumption: 6W
- Voltage: DC 12V 600mA, AC 24V 300mA
✔It can be directly installed on ceilings.
✔It can be directly installed on pipes coming down from the ceiling.
✔It can be directly installed on walls.
✔It can be directly installed on pipes protruding from the wall.
✔It can also be installed on corners of the building or on columns by using a
WALL MOUNTADAPTER (SADT-101WM), CONER MOUNT ADAPTER
(SADT-110CM), or POLE MOUNTADAPTER (SADT-100PM).
(These items are sold separately.)
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 12