94
Video PID:
Use the number pad on your remote control to key in the video PID
(Packet Identification Number) identifying the video data of the new
channel you want on the transponder.
Audio PID:
Use the number pad on your remote control to key in the audio PID
(Packet Identification Number) identifying the audio data of the new
channel you want on the transponder.
PCR PID:
Use the number pad on your remote control to key in the PCR PID
(Programme Clock Reference Packet Identification Number) of the new
channel here. It is normally identical to the video PID.
Start Search:
When you have made your selection, use the  buttons to select
“Start Search” and press to start searching.
Installation Menu
If the search is successful, you see the following message (example):

Motorised Antenna

Only make changes to this menu when settings or circumstances
on/relating to your reception system have changed. The settings
should be made by a specialist engineer.