Installation Menu
Tuner Settings
The optimum setup is shown by the signal strength and quality bar charts at the bottom.
With the East/West limit you can set the extreme stop points (limited by a wall or other obstacles) in the westward and eastward directions.
Always read the operating manual supplied by the
rotor/antenna manufacturer thoroughly (particularly with regard to settings different to those described here).
Use the buttons to select the tuner for which you want to make
the settings and confirm your menu selection by pressing the button. The settings for both tuners are made in the same way.
Select Satellite:
Use the buttons to select the satellite here.
Select Transponder:
Use the buttons to select the transponder here.
Motorised Antenna Setup:
Use the buttons to select the control signal you want to use for the motorised antenna here (DiSEqC™1.2, DiSEqC™1.3 (USALS) or OFF for none).
Motor Control:
Use the buttons to select the command for the motorised antenna here. You can choose between:
-Stop
-Save
-Set East Limit (Start rotation eastwards with
-Set West Limit (Start rotation westwards with
-Limits Off
-Reset
Action:
Press or choose “OK” to activate the “Stop”, “Save”, “Limits Off”
and “Reset” actions. You can also press the / button here to stop ongoing rotations and save the current position.
95
