Atomizing Cap and
Fan Adjustments
The atomizing cap needs to be adjusted for horizontal (Figure 7 & 8) or verti- cal (Figure 9 & 10) spraying patterns. Spraying in the opposite direction may lead to material build up on the atomizing cap horn. Many performance problems are caused by clogged atomizing holes on the atomizing cap horns (see Cleaning on Page 15).
Holes
Stroke
Figure 7. Set up for horizontal stroke,
Model H8115.
Holes
Stroke
Pattern Control
Stroke
Figure 9. Set up for vertical spray stroke,
Model H8115.
Stroke
Pattern Control
Figure 10. Set up for vertical spray stroke,
Model H8117.
Rotating the pattern adjustment control in Figure 9 or 10 will give you a range between the two patterns in Figure 11.
529/32"
Figure 8. Set up for horizontal stroke, | Figure 11. Fan adjustment, Model H8115. |
Model H8117. |
|
Model H8115/H8117 Spray Gun |
