SET UP AND USAGE INSTRUCTIONS
qReplacing the Spark Cartridge:
Friction during sparking will eventually wear out the replaceable cartridge and cause the scooter to stop making sparks. Worn out cartridges must be replaced.
1 Using your thumbs, press tabs | 2 Place a new cartridge in back of the bracket making sure to align the slots |
on both sides of the cartridge to | on the cartridge with the two legs of the bracket. Slide cartridge forward |
release from the bracket. Slide car- | until you hear a click and the thumb tabs are locked in place. |
tridge away from you and remove |
|
from bracket. |
|
qUsing the Spark Handle
1 Pull up on the handle to operate sparking feature. | NEVER push down directly on the Spark Bar, spark |
| cartridge or spark cartridge cover itself. |
WARNING: Do not attempt to replace cartridge immediately after riding as cartridge will be hot. Handle only when cool.
WARNING: Keep fingers clear of Spark Bar hinge.
WARNING: Pulling the Spark Handle upwards too strenuously may cause loss of control.
NOTE: Sparks and Spark cartridge life will vary based on the amount of pressure applied by spark handle, the length of time pressure is applied and the smoothness of the riding surface.
5
