Razor 20036560 ASSEMBLy and SET-UP, Attaching the front fork, Attaching the front Wheel

ASSEMBLy AND SET-UP

qAttaching the front fork

Required Tools: 13mm open wrench and 5mm Allen wrench

1 Remove the steering bolt and	2 Insert the front fork into the	3 Be sure to properly align slot in
locknut from the frame assembly	frame assembly.	headset tube with pin on fork as
with a 13mm open wrench and		shown.
5mm Allen wrench.

4Re-insert the steering bolt and secure with locknut using a 13mm open wrench and 5mm Allen wrench.

qAttaching the front Wheel

Required Tools: 5mm Allen wrench and 10mm open wrench

1 Remove the four coupling	2 Insert the wheel assembly into	3 Re-insert the coupling bolts
bolts from the front fork with a	the front fork assembly and align	through the front fork and tighten
5mm allen wrench and 10mm	holes. When installing the wheel,	securely.
open wrench.	make sure the letter “F” and arrow
	(located on the side of the wheel)
	are facing the direction as shown
	above.

3

WARNING: Failing to properly tighten the steering bolt that attaches the front fork assembly to the frame assembly, can cause you to lose control and fall.