Kathrein UFS 821si, UFS 821sw manual Same method used to input them

TVTV EPG and Timer

When recording to the hard disk the signal is not forwarded to the VCR Scart socket!

Also, when recording to a VCR or PVR, note that most digital TV signals do not contain a VPS signal.

You must therefore always programme your external video or PVR to match the timer settings.

You now have a number of options to programme your recording.

The settings are made using the arrow buttons () and the number pad:

•Recording status (once, daily, weekly, user-defined, series) - selected using the  buttons

•Date (advanced day-by-day) - selected using the  buttons

•Start time (advanced minute-by-minute) - selected using the  buttons or entered directly using the number pad

•End time (advanced minute-by-minute) - selected using the  buttons or entered directly using the number pad

•Recording on (hard disk or external recorder, e.g. video recorder) - selected using the  buttons.

In user-defined recording you can use the  buttons to move to

the various days of the week and press  to activate and deactivate them.

Note:	You can also change the data and settings of timer recordings you have
	programmed from the timer list by pressing the  button. Edit data by
	the same method used to input them.
	Press  to save the selected recording data.
	If the timer recording you are programming overlaps with one or more
	recordings already programmed, you will see the following message
	(example):

Press  to return to the listing and edit your input accordingly. The recordings in black are the ones already stored. The one in white is the one you are currently programming which cannot be entered because of other existing recordings.

61