Kathrein UFS 821sw, UFS 821si manual Signal configuration, As tuner Different to tuner

First Installation

Signal configuration	Signal configuration
“As tuner 1”	“Different to tuner 1”

Press  to view the satellites by continent - that is, which satellites are accessible on which continent. The continents are displayed above the list of satellite names. The selected continent is shown in yellow.

The satellites from the pre-programmed channel list are automatically pre-entered in the right-hand column, and can be changed/deleted according to your reception system.

Press the  and  buttons here to select the satellites you want tuners 1 and 2 to receive signals

from. When you press  to confirm your selection, the chosen satellite is moved into the tuner satellite list on the right.

If you have unintentionally transferred a satellite into the list on the right, you can press the  button

to switch lists and then press  to remove the satellite concerned.

When you have selected all the satellites you want, press .

Press the  and  buttons here to select the satellites you want tuner 1 to receive signals from.

When you press  to confirm your selection, the chosen satellite is moved into the tuner satellite list on the right.

If you have unintentionally transferred a satellite into the list on the right, you can press the  button

to switch lists and then press  to remove the satellite concerned.

When you have selected all the satellites you want, press .

Select here the satellites you want tuner 2 to receive signals from, as you did for tuner 1.

When you have selected all the satellites you want, press .

16