Recording
When recording starts, only the data of the current programme is recorded. The programme running before you switched channels is not recorded.
If there is an overlap with
another scheduled or ongoing recording, the fact is indicated. The receiver then presets the end time for your new recording as the start time of the overlapping programme (see “Duration/ End” at the right).
Start
Press the red button. The following display appears:
You can start recording the programme as from the point you switched
to the channel in question simply by pressing the button, or you can simply wait the 5 seconds for automatic recording to begin. If you want to alter the end time or recording duration, you can do so as described
under “Duration/End” before pressing to start recording.
Duration/End
You can specify the duration of a recording regardless of when it starts. The receiver automatically retrieves the end time of the programme you are currently viewing from the EPG data (where available) and inserts it in the “Duration” field. Otherwise the end time is based on the default duration you set on the “User Preference” menu under “PVR Setup”. If your programmed recording overlaps with another scheduled recording, the end time of the current recording is matched to the start time of the one already scheduled. To change the recording duration,
use the buttons to move to the “Duration” field and use the buttons to select the time after which you want recording to stop
automatically. Press to shorten the recording by 10 minutes and to extend it by 10 minutes.
When you have finished making your settings, use the buttons
to select “OK” and press to start recording. If the end time still overlaps with the start time of a scheduled recording, the receiver automatically switches to the
You can also cancel a recording at any time by pressing the button.
68
