1%
1^
1&
1*
Focus Knob: Moves the telescope’s objective lens (10, Fig. 1) in a
Note: The first time you focus the telescope, you may have to rotate the focus knob 20 to 40 complete turns as this is a fine focus mechanism which allows you to focus an image very precisely.
A. Handbox (HBX) Port: Plug the AutoStar coil cord (8, Fig. 5) into this port.
B. LED: The red power indicator light illuminates when power is supplied to the AutoStar handbox and to the telescope’s motor drive.
C. ON/OFF Switch: Turns the Computer Control Panel and AutoStar ON or OFF.
D. Auxiliary (AUX) Port: Provides connection for current and future Meade acces- sories, such as the Meade “AstroFinder Software with Cable Connector Kit,” which allows you to control your ETX from a PC. See OPTIONAL ACCESSORIES, page 32.
Base Housing: Contains mechanical and electrical assemblies that operate the telescope.
AutoStar with attached cord: See pages 10 to 12 for a description of AutoStar’s features.
1( Bubble Level/Compass: Use when aligning your telescope. When the bubble is in the
center circle, the base is level.
2)Base: Attach the telescope to the base.
2! Adjustable Tripod legs: Support the telescope. The height of the legs can be adjusted. See 2% below.
2@ Accessory tray: Place eyepieces and other accessories on the tray. Holds the AutoStar handbox as well. Attach to one of the leg braces. See 2$ below.
2# Locking Knob: Rotate to secure the tripod legs. Be sure to loosen this knob before col- lapsing the tripod.
2%
Leg Braces: Strengthens the tripod legs.
Leg Locks: Lift the lever to move the inner tripod leg segment in or out when adjusting the height of the tripod.
9