Meade ETX-80AT-TC Maintenance and Servicing, General Maintenance, Storage and Transport

MAINTENANCE AND SERVICING

General Maintenance

The ETX-80AT telescope is a precision optical instrument designed to yield a lifetime of reward- ing applications. Given the care and respect due any precision instrument, your telescope will rarely require factory servicing or maintenance. Maintenance guidelines include:

1.Avoid cleaning the telescope’s optics. A little dust on the front surface of the telescope’s correcting lens causes virtually no degradation of image quality and should not be con- sidered reason to clean the lens.

2.When absolutely necessary, dust on the front lens should be removed with gentle strokes of a camel hair brush or blown off with an ear syringe (available at any pharmacy). Do not use a commercial photographic lens cleaner.

3.Organic materials (e.g., fingerprints) on the front lens may be removed with a solution of 3 parts distilled water to 1 part isopropyl alcohol. A single drop of biodegradable dish- washing soap may be added per pint of solution. Use soft, white facial tissues and make short, gentle strokes. Change tissues often.

CAUTION: Do not use scented, colored, or lotioned tissues as damage could result to the optics.

4.If your telescope is used outdoors on a humid night, telescope surfaces may accumulate water condensation. While such condensation does not normally cause any damage to the telescope, it is recommended that the entire telescope be wiped down with a dry cloth before being packed away. Do not, however, wipe any of the optical surfaces. Rather, sim- ply allow the telescope to sit for some time in warm indoor air, so that the wet optical sur- faces can dry unattended. In addition, the dust cap should not be placed back on to the optical tube until the telescope is thoroughly dry.

5If your telescope is not to be used for an extended period, perhaps for one month or more, it is advisable to remove the six AB-size batteries from inside the drive base. Batteries left installed for prolonged periods may leak, causing damage to the telescope’s electronic cir- cuitry. See TELESCOPE ASSEMBLY, page 13.

6.Do not leave your telescope outdoors on a warm day or inside a sealed car for an extend- ed period of time. Excessive ambient temperatures can damage the telescope’s internal lubrication and electronic circuitry.

7.A (English-format) hex wrench is provided with the ETX-80AT. Use the wrench to tighten the set-screws of any knobs which may loosen, such as the horizontal lock knob or focus knob.

Storage and Transport

When not in use, store the telescope in a cool, dry place. Do not expose the instrument to excessive heat or moisture. It is best to store the telescope in its original box with the vertical and horizontal locks (13 and 14, Fig. 1) in the unlocked positions. If shipping the telescope, use the original box and packing material to protect the telescope during shipment.

When transporting the telescope, take care not to bump or drop the instrument; this type of abuse can damage the optical tube and/or the objective lens. It is highly recommended to use the optional Hard Case to transport the telescope. See OPTIONAL ACCESSORIES, page 32.

Inspecting the Optics

A Note About the “Flashlight Test": If a flashlight or other high-intensity light source is point- ed down the main telescope tube, the view (depending upon the observer’s line of sight and the angle of the light) may reveal what appears to be scratches, dark or bright spots, or uneven coatings, giving the appearance of poor quality optics. These effects are only seen when a high intensity light is transmitted through the lens or reflected off the mirror, and can be seen on any high quality optical system, including giant research telescopes.

The optical quality of a telescope cannot be judged by the “flashlight test"; the true test of opti- cal quality can only be conducted through careful star testing.

33