User Maintenance Instructions
This appliance contains no user serviceable parts. Do not try to repair it yourself. Any servicing requiring disassembly other than cleaning must be performed by a qualified appliance repair technician.
Always remember to unplug the unit from the wall outlet when not in use and before cleaning.
Cleaning and Storage Instructions
Before using for the first time and after each use, wash all Pressure Cooker parts by hand. Always unplug unit and allow to cool completely before cleaning.
1.Remove the Gasket from the Lid. Wash Gasket thoroughly in hot, soapy water. Rinse and dry thoroughly. Apply a thin coating of vegetable oil to the Gasket after each use. This will extend the life of the Gasket. Slip the Gasket back in place on
the inside of the Lid.
2.The Gasket that fits inside the Lid may become worn after many uses. If it becomes torn, cracked, cut or visibly damaged, DO NOT USE THE PRESSURE COOKER. Call Consumer Service at
3.Clean around the openings of the Pressure Lift Pin and Lift Pin Gasket with warm soapy water to keep it free of grease or food particles that could keep it from operating properly. Rinse and dry thoroughly.
4.To expose the Steam Vent Tube, the Pressure Regulator must be removed. Press down and turn the Pressure Regulator counter- clockwise to the CLEAN position, until it stops. Lift up on the Pressure Regulator and remove.
Hold the Pressure Cooker Lid up to the light to make sure the Steam Vent Tube is clear. If the Steam Vent Tube is blocked, carefully insert the Cleaning Brush into the Steam Vent Tube and run it gently in and out to clear any obstructions. Wash again with soapy water, rinse and dry thoroughly. (See Important Safety Information.)
Steam
Release
Pressure
Steam Clean
19.