To Add a landmark to the database:
In this procedure, you will store the location of terrestrial landmarks in AutoStar's memory.
1.Set the telescope in the home position, if necessary. Note for future reference where the telescope is located and if you have aligned the telescope, which alignment method is used.
Important Note: To use the Landmark function, the telescope must be located and aligned exactly as when the landmark(s) was added to the database.
2.Display the "Setup: Targets" menu option. Choose "Terrestrial" and press ENTER
– "Setup: Targets" displays again. Choosing this option turns off tracking for astro- nomical objects and is not useful for the viewing of terrestrial objects such as those in the Landmark database. Be sure to change this option back to "Astronomical" when you wish to view celestial objects again.
3.Press MODE once. "Select Item: Setup" displays.
4.Press the Scroll Down key once and "Select Item: Object" displays. Press
ENTER. "Object: Solar System" displays.
5.Press the Scroll Up key twice and "Object: Landmarks" displays. Press ENTER.
"Landmark: Select" displays.
6.Press the Scroll Down key once. "Landmark: Add" displays. Press ENTER.
7."Landmark Name" displays. Using Arrow keys, enter a name for the landmark you wish to add to the database. When finished, press ENTER.
8."Center Landmark. Press Enter" displays. Using only the Arrow keys (do not man- ually move the telescope), move the telescope to the desired landmark and cen- ter the object in the eyepiece. Press ENTER. The object is now stored in memo- ry.
9."Landmark: Add" displays. If you wish to add more landmarks, repeat steps 5 through 7.
To Select a landmark from the database:
1.Make sure the telescope is located and aligned exactly as when the desired landmark was entered into memory.
2.Display the "Landmark: Select" menu option. Press ENTER.
3.Use the Scroll keys to scroll through the list of objects you have previously entered. When the desired object displays, press ENTER to select the object. Use the Scroll keys to scroll through location information about the object, if desired. Press GO TO to slew the telescope to the landmark.
4.Press MODE to exit.
To perform a Landmark Survey
This procedure allows you to perform a tour of the objects entered in the "Object: Landmark" menu
1.Navigate to "Utilities: Landmark Survey" menu and press ENTER.
2."Landmark Survey: Slewing..." displays. The telescope moves to the first object on the Survey list and displays the name of the object.
3.Press MODE to pause the Survey. Press ENTER to restart the survey at the first object of the survey.
To check on the available amount of memory in AutoStar.
AutoStar has a limited amount of memory. Once you begin to store Landmarks, User Objects and other bits of information in AutoStar, you will begin to use up memory. This procedure allows you to check on how much memory is still available.
1.Navigate to the "Setup: Statistics" menu option and press ENTER.
2."Statistics: 37.2K Char. Free" displays. This is the amount of memory that is still available to the user.
Identify
This procedure allows you to use AutoStar to identify objects you have found in the night sky using the Arrow keys. If the object is not in AutoStar's database, AutoStar
35
