ODI Specific Error Messages | Ositech comm 614006-001 specs

Appendices

ODI Specific Error Messages

MLID could not be unloaded, the operation was aborted MLID could not register Protocol ID

This version of LSL is not supported

The frame type is already activated for frame

The node address was incorrectly specified in NET.CFG An invalid keyword was specified in NET.CFG on line nnn The frame type specified in the NET.CFG is not supported The LSL is not loaded

The LSL has no more room for a board using Frame xxxxxxxxxx

The above error messages are specific to the Trumpcard Ethernet ODI drivers. The error messages are self explanitory, and are only shown for completeness.

NDIS Specific Error Messages

Media Parameter is Invalid

Socket Parameter is Invalid

Mem Parameter is Invalid

NetAddress parameter is invalid

MaxTransmit parameter is invalid

Can not establish a unique name for driver

The above error messages are specific to the Trumpcard Ethernet NDIS drivers. The error messages are self explanitory, and are only shown for completeness.

User’sGuideandReference

4 - 11

Image 53

Ositech comm 614006-001 manual ODI Specific Error Messages

Contents

User’s Guide and Reference Trumpcard Ethernet LAN Copyright How To Contact Us Preface FCC Notice Contents Appendices Section One Introduction Trumpcard Ethernet LAN Section Two Hardware InstallationPreparing for Installation Installing the Trumpcard Ethernet LAN Connecting to 10BaseT Twisted Pair Networks Media Access Module 10BaseT Network Connection Interface Cabling and Pinout Concentrators Twisted Pair Network Characteristics Connecting to 10Base2 Thin Ethernet Networks Thin Coax Ethernet Segment Meter segments unless all LAN adapters and repeaters Characteristics Standard Length Extended Length Segment Thin Ethernet Network Characteristics Link LED Green Media Access Module LED IndicatorsActivity LED RED Section Two Section Three Operation Multi-Function Configuration Socket Services and Card Services Banyan Vines Network Software Installation \DOS \DOS\OTCETH.DOS DEVICE=C\DECNET\PROTMAN.SYS /IC\DECNET FTP Software LanWatchDEVICE=C\DECNET\OTCETH.DOS Call \DECNET\STARTNET IBM LAN Server Operation IBM LAN Support Program \LSP\NETBIND \LANMAN\NETBIND Microsoft LAN ManagerMicrosoft Windows for Workgroups PATH=C\NOVELL\NET.CFG OSI$OTCETH \WFW\311 \WINDOWS\NETSTART DEVICE=C\WINDOWS\IFSHLP.SYSCD \NOVELL LSL Network Microsoft Windows NT PRIORITY=MS$NETBEUI MS$OTCETH$NIC Microsoft Workgroup Connection for DOS\DOS\NET Start BINDINGS=MS$OTCETH$NIC LANABASE=0 Ndis Generic Path Novell Netware for DOS Netware Netx \NETWARE\OS2\OTCETH.SYS Novell Netware for OS/2 Novell Unixware Dlpi Driver Accompanying the PC Card for more details SCO Unix LLI Driver Init Single User Mode Section Four Appendices Media media type Appendix a ODI KeywordsFrame frame type MEM memory location INT interrupt levelPort I/O port Node Address nnnnnnnnnnnn Socket socket number Protocol named protocol protocol id frame typeLook Ahead Size look ahead value Frame ETHERNET802.3 Media 10BASET Exclusive Dislink INT MEM= memory location Appendix B Ndis KeywordsMEDIA= media type IOBASE= I/O port INTERRUPT= interrupt levelNETADDRESS= ‘nnnnnnnnnnnn’ SOCKET= socket number DRIVERNAME=STACK$ BINDINGS=OSITECHNIF PROTOCOL.INI Example Failed to register with Multi-Function Manager Appendix C Messages Unable to configure Trumpcard Failed to register with Card ServicesOnly supported on Pcmcia 2.x or higher Socket/Card Services Pcmcia adapter not found Must be an AT .286 or higher system Expected Tuple not foundHardware not responding No Media Cable Connected ODI Specific Error Messages Section Four